Publications
2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 1991 1990 1989 1988 1987 1986 1985 1984 1983 1982 1981 1980 1979 1978 1977 1976 1975 1974 1973 1972 1971 1970 1969 1968 1967 1966 1965 1964 1963 1962 1961 1959 1958 1957 1956 1954 1953 1952 1951 all years
Books
Dr.-Ing. Dipl.-Phys. Markus Kästner (2016): Streifenprojektionsmesstechnik-Grundlagen und aktuelle Forschung
Journals
Jochen Schlobohm *, Andreas Pösch and Eduard Reithmeier (2016):
A Raspberry Pi Based Portable Endoscopic 3D Measurement System, Electronics
DOI: doi:10.3390/electronics5030043
Jochen Schlobohm *, Yinan Li, Andreas Pösch, Markus Kästner, Eduard Reithmeier (2016):
Multiscale measurement of air foils with data fusion of three optical inspection systems, CIRPJ
DOI: 10.1016/j.cirpj.2016.07.006
Jochen Schlobohm, Andreas Pösch, Eduard Reithmeier, Bodo Rosenhahn (2016):
Improving contour based pose estimation for fast 3D measurement of free form objects, Measurement 92 (2016) 79-82
DOI: 10.1016/j.measurement.2016.05.093
Jochen Schlobohm, Oliver Bruchwald, Wojciech
Frackowiak, Yinan Li, Markus Kästner, Andreas
Pösch, Wilfried Reimche, Eduard Reithmeier and
Hans Jürgen Maier, (2016):
Turbine blade wear and damage - An overview of advanced characterization techniques, Materials testing 58 (2016) 5
DOI: 10.3139/120.110872
Matthias, S.; Kästner, M.; Reithmeier, E. (2016):
Modeling of imaging fiber bundles and adapted signal processing for fringe projection, Advanced Optical Technologies
DOI: 10.1515/aot-2016-0050
Matthias, S.; Loderer, A.; Koch, S.; Gröne, M.; Kästner, M.; Hübner, S.; Krimm, R.; Reithmeier, E.; Hausotte, T.; Behrens, B. (2016):
Metrological solutions for an adapted inspection of parts and tools of a sheet-bulk metal forming process, Vol. 10 (1), Production Engineering
DOI: 10.1007/s11740-015-0647-2
Müller, T., Jordan, M., Schneider, T., Pösch, A., Reithmeier, E. (2016):
Measurement of steep edges and undercuts in confocal microscopy, Micron, 84, 79-95
DOI: doi:10.1016/j.micron.2016.03.001
Pösch, Andreas; Schlobohm, Jochen; Matthias, Steffen; Reithmeier, Eduard (2016):
Rigid and flexible endoscopes for three dimensional measurement of inside machine parts using fringe projection, Optics and Lasers in Engineering
DOI: 10.1016/j.optlaseng.2016.05.023
Wiederkehr (geb. Kersting), P.; Gröbel, D.; Merklein, M.; Sieczkarek, P.; Tekkaya, A.; Krebs, E.; Freiburg, D.; Biermann, D.; Weikert, T.; Wartzack, S.; Stangier, D.; Tillmann, W.; Matthias, S.; Reithmeier, E.; Löffler, M.; Beyer, F.; Willner, K. (2016): Experimental and numcerial analysis of tribological effective surfaces for forming tools in Sheet-Bulk Metal Forming, Production Engineering
Zou, Y.; Kästner, M.; Reithmeier, E. (2016):
Analysis of the multiscale measurement of porous microstructures based on 3D optical microscropes, Measurement
DOI: 10.1016/j.measurement.2016.01.020
Zou, Y.; Kästner, M.; Reithmeier, E. (2016):
Dimensional fractal analysis of thermal spray coatings based on optical roughness measurement, Technisches Messen
DOI: DOI 10.1515/teme-2016-0006
Zou, Y.; Li, Y.; Kästner, M.; Reithmeier, E. (2016):
Low coherence interferometry based roughness measurement on turbine blade surfaces using wavelet analysis, Optics and Lasers in Engineerung
DOI: 10.1016/j.optlaseng.2016.02.011
Conferences
Altmann, B.; Rohloff, B.; Pape, Ch.; Reithmeier, E. (2016): Vibration Measurements of Rotating Objects Using an Optomechatronical Image Derotator , 117. Jahrestagung der DGaO vom 17. bis 21. Mai 2016 in Hannover
Altmann, B.; Rohloff, B.; Pape, Ch.; Reithmeier, E. (2016):
Identification and Tracking-Control for an Optomechatronical Image Derotator Using Neural Networks
, PAMM · Proc. Appl. Math. Mech.
DOI: 10.1002/pamm.201610386
Dietz, A., Schröder, S., Pösch, A., Frank, K., Reithmeier, E. (2016):
Contactless Surgery Light Control based on 3D Gesture Recognition, GCAI 2016. 2nd Global Conference on Artificial Intelligence, EPiC Series in Computing, volume 41, pages 138-146, 2016
DOI: 10.29007/zmz9
ISBN: 2398-7340 (ISSN)
Gorschenew, W.; Reithmeier, E. (2016): Calibration of multiple light stripe sensors to create a multi-sensor system for the 3D measurement of complex macro geometries, 117. Jahrestagung der DGaO vom 17. bis 21. Mai 2016 in Hannover, ISSN: 1614-8436, P22
Höber, S., Pape, C., Reithmeier, E. (2016):
Automatic Stabilization of an Adaptive Feedback Control for Noise Cancelling In-Ear Headphones, Proc. of the Inter-Noise 2016 - 45th International Congress and Exposition on Noise Control Engineering, 444-452
ISBN: 978-3-939296-11-9
Kröger, N.; Schlobohm, J.; Pösch, A.; Reithmeier, E. (2016): Using Refraction in Thin Glass Plates for Optical Path Length Modulation in Low Coherence Interferometry, European Optical Society Annual Meeting (EOSAM) 2016
Li,Y.; Bossmeyer, H.; Kästner, M.; Reithmeier, E. (2016):
Development of an edge sensor based on polyview optics and laser triangulation principle, In SPIE/COS Photonics Asia (pp. 100231E-100231E). International Society for Optics and Photonics 2016.
DOI: doi:10.1117/12.2247007
Li,Y.; Kästner, M.; Reithmeier, E. (2016): Edge measurement based on multi laser triangulation sensors, 117. Jahrestagung der DGaO vom 17. bis 21. Mai 2016 in Hannover
Loftfield, N.; Kästner, M.; Reithmeier, E. (2016): The impact of different data filters on the characterization of porous surfaces, 117. Jahrestagung der DGaO vom 17. bis 21. Mai 2016 in Hannover
Mueller, T. , Poesch, A. and Reithmeier, E. (2016): Laser triangulation in harsh industrial conditions, 117. Jahrestagung der DGaO vom 17. bis 21. Mai 2016 in Hannover
Zou, Y.; Kästner, M.; Reithmeier, E. (2016): Wear Process Monitoring of thermal spray coatings and surface topography analysis using a confocal laser scanning microscopy, 117. Jahrestagung der DGaO vom 17. bis 21. Mai 2016 in Hannover
other Publications
C. Freystein, A. Pösch, J. Schlobohm (2016): Optisches Messsystem und optisches Messverfahren , Patent DE201610105426 2018 erteilt
Schindlbeck C.; Pape, Ch.; Reithmeier, E. (2016): Groß und dennoch hochpräzise: Die Fertigung mikrooptischer Komponenten mittels Makro-Mikro-Manipulation, Unimagazin Leibniz Universität Hannover 03/04 2016
Dissertations
Dr.-Ing. Leonard Klaus (2016):
Entwicklung eines primären Verfahrens zur Kalibrierung von Drehmomentaufnehmern mit dynamischer Anregung
ISBN: 978-3-95606-263-6
Dr.-Ing. Oliver Albers (2016): Multi-Sensor Geometrieerfassung zur Qualitätssicherung mittels Streifenprojektion
Dr.-Ing. Thomas Müller (2016): Messung der Oberfächentopographie von Riblet-strukturierten Bauteilen zur Überwachung des Fertigungprozesses