Publications
2021 2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 1991 1990 1989 1988 1987 1986 1985 1984 1983 1982 1981 1980 1979 1978 1977 1976 1975 1974 1973 1972 1971 1970 1969 1968 1967 1966 1965 1964 1963 1962 1961 1959 1958 1957 1956 1954 1953 1952 1951 all years
Books
Rahlves, M; Seewig, J.; Beichert, G.; Berger, G.; Gillhaus, R.; Kästner, M.; Körfer, F.; Köllmann, D.; Lyda, D.; Püschmann, D. (2009): Optisches Messen technischer Oberflächen. Messprinzipien und Begriffe, Beuth Verlag, Berlin
Journals
Behrens, B.-A.; Odening, D.; Gillhaus, R.; Kästner, M.; Reithmeier, E. (2009): Fertigungsintegrierte Messeinrichtung zur Lageerfassung präzisionsgeschmiedeter Ritzelwellen., UTF science 2009, Ausgabe 3/2009
Behrens, B. A.; Odening, D.; Gillhaus, R.; Kästner, M.; Reithmeier, E. (2009): Feiner Beitrag zur Effizienz, Umformtechnik, 04/2009, S. 28-29
Graf, J.; Reithmeier E. (2009): Computationally Efficient Active Noise Reduction in Headsets, Journal of Computer and Systems Sciences International. Volume 48, Number 4 / August 2009, S. 567-573
Gretzki, T.; Krause, C.; Frolov, I.; Hassel, T.; Nicolaus, M.; Bach, F.-W.; Kästner, M.; Abo-Namous, O.; Reithmeier, E. (2009): Manufacturing Surface Hardened Components of 42CrMo4 by means of Water-Air Spray Cooling, steel research international, Volume 80, December 2009, pp. 906 - 915
Kästner, M.; Gillhaus, R.; Reithmeier, E. (2009): Geometry Inspection of Precision-Forged Crank Shafts Based on Optical Multisensor Techniques, The Journal of the CMSC, pp. 27-32, 2009.
Mirzaei, S.; Rahlves, M.; Fahlbusch, T.; Reithmeier, E. (2009): Drehend Messen: Vorteile des Derotators bei der Schwingungsanalyse, MessTec & Automation 6/2009
Pahlke, A.; Gillhaus, R.; Schroth, M.; Kästner, M.; Reithmeier, E. (2009): Mit scharfem Blick. Konoskopische Lasersensoren erfassen komplexe Bauteile, QZ - Qualität und Zuverlässigkeit, 6/2009, Jahrgang 54, S. 43 - 45
Pelshenke, C.; Denkena, B.; Bockhorst, J.; Reithmeier, E.; Fahlbusch, T.; Rahlves, M. (2009): Schnittverlauf beim Trennschleifen von Natursteinen. (Teil 1 - 3), dihw III - IV
Vynnyk, T.; Fahlbusch, T.; Reithmeier, E.: (2009): 3D-Oberflächenvermessung mit einem Stereo- Rasterelektonenmikroskop, Technisches Messen 76 (2009), Oldenburg Wissenschaftsverlag, S. 496- 502
Conferences
Abo-Namous, O.; Kästner, M.; Reithmeier, E. (2009): Interior Geometry Inspection Using Rerouted Fringe Projection, Fringe09, Nürtingen, 13.-16. September 2009, pp. 709 - 712
Bretschneider, M.; Kästner, M.; Reithmeier, E. (2009): Measurement and Characterisation of Microstructures made by Cutting Processes, Proceedings of the euspen 9th International Conference, San Sebastian, 02.-05. June 2009, Volume 2, pp. 223 - 226
Bretschneider, M.; Kästner, M.; Reithmeier, E. (2009): Metrology and Charcterisation of Thermally Sprayed Coatings, Proceedings of the 12th International Conference on Metrology and Properties of Engineering Surfaces, Rzeszow, Poland, 08.-10. July 2009, pp. 317 - 321
Buse, O.; Reithmeier, E. (2009): Aufbau eines statischen low-cost Fourierspektrometers, Mikrosystemtechnik Kongress 2009 Proceedings, 12. - 14. Oktober, Berlin, 2009
Denkena, B.; Möhring, H.-C.; Rosen, S.; Reithmeier, E.; Kästner, M.; Pahlke, A. (2009): Adaptronische Feinpositionierung - Lösungsansatz zur Produktivitätssteigerung, VDI-Tagung "Automation 2009", 16.-17. Juni 2009, Baden-Baden, VDI Berichte, S. 353 - 356
Gillhaus, R.; Immel, J.; Kästner, M.; Reithmeier, E.; Denkena, B. (2009): Vier-Freiheitsgrad Feinpositioniersystem zur Ausrichtung von präzisionsgeschmiedeten Ritzelwellen, VDI-Tagung "Automation 2009", 16.-17. Juni 2009, Baden-Baden, VDI Berichte Nr. 2067, S. 335 - 338
Gillhaus, R.; Kästner, M.; Haskamp, K.; Abo-Namous, O.; Reithmeier, E. (2009): Analysis of Unbalances of Crank Shafts using Geometric Data, Proceedings of the euspen 9th International Conference, San Sebastian, 02.-05. June 2009, Volume 2, S. 287 - 290
Graf, J.; Reithmeier E. (2009): Feedback Control for Active Noise Reduction in Headsets, NAG/DAGA International Conference on Acoustics, 23. - 26. March 2009, Rotterdam, pp. 1208 - 1211
Graf, J.; Reithmeier E. (2009): Computationally Efficient Active Noise Reduction in Headsets, International Conference on the Control of Dynamical Systems, Moscow, 26. – 30. January 2009, pp. 567 - 573
Graf, J.; Reithmeier, E. (2009): Combined Control for Computationally Efficient Active Noise Reduction in Aviation Headsets, Proceedings MATHMOD Vienna 09, 11. - 13. February 2009, pp. 411 - 415
Graf, J.; Reithmeier, E. (2009): Improving Speech Intelligibility in Communication Headsets using Active Noise Reduction, 15th International Workshop on Dynamics and Control 2009, pp. 65 - 72
Hao, Q.; Karpinska A.; Kaestner, M.; Reithmeier, E. (2009): Precise calculation of wear based on comparison of initial and worn surface topographies, Proceedings of the 12th International Conference on Metrology and Properties of Engineering Surfaces, Rzeszow, 2009, pp.329-333
Hao, Q.; Kästner, M.; Reithmeier, E. (2009): Charakterisierung der Si-Partikelhöhen auf einer gelaufenen Alusil-Zylinderlaufbahnoberfläche mittels eines konfokalen Weißlichtmikroskops, Dritter Workshop Optische Technologien, 2009, Hannover, pp. 190-196
Haskamp, K.; Kästner, M.; Reithmeier, E. (2009): A Virtual Telecentric Fringe Projection System, Proceedings of the Fringe 6th International Workshop on Advanced Optical Metrology, Stuttgart, 14.-16. September 2009, S. 576-579
Karpinska, A.; Olver, A. V.; Hao, Q. (2009): The effect of anti-wear additives and surface roughness layout on running-in of steel surfaces, Proceedings of the 2nd European Conference on Tribology, Pisa, 2009, pp.133-138
Kästner, M.; Gillhaus, R.; Reithmeier, E. (2009): Geometry Inspection of Precision-Forged Crank Shafts Based on Optical Multisensor Techniques, Coordinate Metrology Systems Conference (CMSC) 2009 – Louisville, Kentucky, USA
Mirzaei, S.; Abo-Namous, O.; Beichert, G.; Fahlbusch, T.; Reithmeier, E. (2009): Developing a new generation of optomechanical derotator for analysis of the dynamic behaviour of rotating components, Proc. SPIE 'Advances in Optomechanics' (Optics and Photonics) 7424
Mirzaei, S.; Fahlbusch, T.; Reithmeier, E.; Poll, G. (2009): Optische Schlupfmessung an rotierenden Wälzlagern und deren Auswertung mit digitaler Bildverarbeitungstechnik, VDI-Tagung: "Gleit- und Wälzlagerung: Gestaltung, Berechnung, Einsatz'", 09-10 Juni 2009, Wiesloch bei Heidelberg, VDI-Berichte Nr. 2069, S. 91-102
Mirzaei, S.; Rahlves, M.; Fahlbusch, T.; Reithmeier, E. (2009): Application of an Optomechanical Image Derotator for Measuring Vibration and Deformation of Rotating Objects, Proceedings Optimess (2009)
Pahlke, A.; Rosen S.; Kästner, M.; Möhring, H.-C.; Reithmeier, E.; Denkena, B. (2009): Adaptronic Precision Positioning Technology, ASME IDETC/CIE 2009 Proceedings, August 30 - September 2, 2009, San Diego, California, USA, Paper: DETC2009-86658
Rahlves, M.; Mirzaei, S.; Fahlbusch, T.; Reithmeier, E. (2009): In-plane and out-of-plane deformation and vibration measurement using an optomechanical image derotator, Proc. SPIE 'Optical Inspection and Metrology for Non-Optics Industries' (Optics and Photonics) 7432
Scheuer, R.; Mertiny, P.; Bormann, D. (2009): Analysis of surface strains and leakage behavior in composite pipes and vessels using digital image correlation technique, Proceedings of 2009 ASME Pressure Vessels and Piping Division Conference, 77522
Schultheis, T.; Vynnyk, T.; Fahlbusch, T.; Reithmeier, E. (2009): Enhanced stereo SEM measurement of sub-micrometer structures, Proceedings of the 3rd EOS Topical Meeting on Optical Microsystems (OμS'09), Capri, Italy, 27th-30th September 2009, ISBN 978-3-00-024191-8
Dissertations
Böttner, T. (2009): Messunsicherheitsbetrachtungen an einem virtuellen Streifenprojektionssystem, 2009,Shaker Verlag
Graf, J. (2009): Berechnungseffiziente Regelstrategien zur aktiven Lärmreduktion in Headsets, 2009, Shaker Verlag