• Zielgruppen
  • Suche
 

Publikationen

Suche nach
in in allen Feldern AutorTitelBeschreibung
Kategorie
Jahr
 

2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 1991 1990 1989 1988 1987 1986 1985 1984 1983 1982 1981 1980 1979 1978 1977 1976 1975 1974 1973 1972 1971 1970 1969 1968 1967 1966 1965 1964 1963 1962 1961 1959 1958 1957 1956 1954 1953 1952 1951 alle Jahre

Bücher

Behrens. B., Nitschke. T., Li. Y., Reithmeier,E. (2013): Einsatzpotential einer örtlich aufgelöst messenden Umformkraftsensorik und Qualifizierung zu einem Prozessüberwachungssystem, EFB-Forschungsbericht Nr. 388
ISBN: 978-3-86776-431-5

Janz, A., Pape, C., Reithmeier, E. (2013): 6D-Measurement System for the Position Determination of a Robot End-Effector, Fringe 2013 - 7th International Workshop on Advanced Optical Imaging and Metrology, pp. 531-534, DOI: 10.1007/978-3-642-36359-7_95

Krauß, M., Kästner, M., Reithmeier, E (2013): Evaluation of Worn Surfaces Using Directional Illumination, Optical Measurement Techniques for Systems & Structures², ISBN 978-90-423-0419-2 S. 195-203

Li, Y. (2013): An analysis of the potential and quali cation of the process control system of a local distributed force-sensing technology, Scientific Reports 2011-2013 Instititute of Measurement and Automatic Control

Ohrt C., Kästner M., Reithmeier E. (2013): A device for endoscopic measurements of forming tools with filigree side elements, Optical Measurement Techniques for Systems & Structures², ISBN 978-90-423-0419-2 S. 273-280

Ohrt, C.; Matthias S.; Kästner, M.; Reithmeier, E (2013): A DEVICE FOR ENDOSCOPIC MEASUREMENTS OF FORMING TOOLS WITH FILIGREE SIDE ELEMENTS, Recent Advances in Topography, ResearchNova Science Publishers, S. 255 - 276, ISBN: 978-1-62618-840-2

Ohrt, C.; Matthias, S.; Kästner, M.; Reithmeier, E (2013): A DEVICE FOR ENDOSCOPIC MEASUREMENTS OF FORMING TOOLS WITH FILIGREE SIDE ELEMENTS, Recent Advances in Topography Research
ISBN: 978-1-62618-840-2

Rohloff, B.: (2013): Calibration of an Optomechanical Image Derotator with a 6-Axes Parallel Kinematics Using Image Processing Algorithms, Scientific Reports 2011-2013 Instititute of Measurement and Automatic Control

Journale

Janz, A., Pape, C., Reithmeier, E. (2013): Position Determination of a Robot End-Effector Using a 6D-Measurement System Based on the Two-View Vision, Open Journal of Applied Sciences, DOI: 10.4236/ojapps.2013.37049

Krauß, M., Kästner, M., Reithmeier, E. (2013): Multi-Scale Inspection of Worn Surfaces for Product Regeneration, Journal of the CMSC 1/2013

Mueller T., Reithmeier E. (2013): Optical Inspection of Microstructured Surfaces under Industrial Conditions, Institute of Measurement and Automatic Control, Scientific Reports 2011-2013, ISBN 978-3-944586-32-8

Ohrt, C.; Kästner, M.; Reithmeier, E. (2013): High resolution measurements of filigree, inner geometries with endoscopic micro fringe projection, Proceedings of SPIE, Optical Measurement Systems for Industrial Inspection VIII Volume 8788, S. 878817-1 doi: 10.1117/12.2020440

Pösch. A.; Vynnyk. T.; Reithmeier, E. (2013): Fast Detection of Geometry Defects on Free Form Surfaces Using Inverse Fringe Projection, Journal of the CMSC, Vol. 8, No. 1

Scheuer,R., Reithmeier, E., Windeler,N. B.  (2013): Stitching and Memory-Optimized Processing of Three-Dimensional Riblet Surface Datasets for Oil Channel Tests, International Journal of Modeling and Optimization Vol. 3, No. 5, October 2013, p.453-457

Konferenzen

A. Pösch, M. Krauß, W. Frackowiak, O. Bruchwald (2013): Multisensorische Geometrie- und Basis-Schichtsystem-Charakterisierung, SFB871 Kolloquium, Hannover Messe 2013

Bruhnken C., Priese S., Foudhaili H., Peissig J., Reithmeier E. (2013): Adaptive Feedback Control for Active Noise Cancellation with In-Ear Headphones, AIA-DAGA 2013 - Merano, 39. Jahrestagung für Akustik, S.1703-1706, ISBN 978-3-939296-05-8

Christoph Ohrt, Andreas Pösch, Dr. Markus Kästner, Prof. Eduard Reithmeier (2013): One Image Fibrescopic Finge Projection with Inverse Approach, 11th International Symposium on Measurement and Quality Control 2013, September 11-13, 2013, Cracow-Kielce, Poland

Christoph Ohrt, Andreas Pösch, Markus Kästner, Eduard Reithmeier (2013): Potentials of Endoscopic Fringe Projection - A Differetiation of Measuring Video-, Fiber- and Borescopy, Fringe 2013, 7th International Workshop on Advanced Optical Imaging and Metrology, ISBN 978-3-642-36358-0, DOI: 10.1007/978-3-642-36359-7_135

Engelke, F., Kästner, M., Reithmeier, E. (2013): Measurement based simulation of microscope deviations for evaluation of stitching algorithms for the extension of Fourier-based alignment, SPIE Optical Metrology 2013. International Society for Optics and Photonics, 2013

Engelke, F., Kästner, M., Reithmeier, E. (2013): 3D - Reconstruction of Microstructures on Cylinder Liners, Proc. 13th Int. Conf. of the EUSPEN, 2013, S. 132-135

Engelke, F., Kästner, M., Reithmeier, E. (2013): Verbessertes Stitching von 3D-Mikroskopiedaten auf Grundlage von Simulationsergebnissen, Deutsche Gesellschaft für angewandte Optik, 114. Jahrestagung

Kästner, M.; Hausotte, T.; Reithmeier, E.; Loderer, A.; Ohrt, C.; Sieczkarek, P. (2013): Fertigungsnahe Qualitätskontrolle von Werkzeug und Werkstück, 2. Workshop Blechmassivumformung, 2(2013)1, Meisenbach GmbH Verlag, S. 101-119

Krauß, M.; Kästner, M., Reithmeier, E. (2013): Data quality estimation from interdependencies for structural light scanners, Computational Vision and Medical Image Processing: Vip Image 2013 ISBN: 978113800081

M. Krauß, W. Frackowiak, A. Pösch, M. Kästner, W. Reimche, E. Reithmeier, H. J .Maier (2013): Assessment of used turbine blades on and beneath the surface for product regeneration: Generation of a damage model based on reflection, geometry measurement and thermography , CLEO 2013 16.5.2013 München

Ohrt C., Kästner M., Reithmeier E. (2013): Fibrescopic Micro Fringe Projection, Metromeet 2013 - 9th International Conference on Industrial Dimensional Metrology (Invited Talk)

Ohrt, C.; Kästner, M.; Reithmeier, E. (2013): High resolution measurements of filigree, inner geometries with endoscopic micro fringe projection, SPIE Optical Metrology 2013, München, S. 878817-1 doi: 10.1117/12.2020440

Ohrt, C.; Kästner, M.; Reithmeier, E. (2013): Fiberskopische Geometriemessung auf Basis der Streifenprojektion, 114. JAHRESTAGUNG VOM 21. BIS 25. MAI 2013 IN BRAUNSCHWEIG

Pösch, A.; Kästner, M.; Reithmeier, E. (2013): Fringe projection measurement of highly specular objects in presence of multi-reflection, VIP Image, Funchal

Priese S., Bruhnken C., Voss D., Peissig J., Reithmeier E. (2013): The Need for Psychoacoustics in Active Noise Control, AIA-DAGA 2013 Merano, 39. Jahrestagung für Akustik S. 1710-1713, ISBN 978-3-939296-05-8

Rohloff, B., Mueller, A., Vynnyk, T., Pape, C., Reithmeier, E. (2013): Calibration of the Optical Axes of an Image Derotator Using Image Processing and a 6-Axes Parallel Kinematics, 114. Jahrestagung der Deutschen Gesellschaft für angewandte Optik, 21.-25. Mai, Braunschweig

Rohloff, B., Pape, C., Reithmeier, E.: (2013): Bildrückgeführte Kalibrierung eines optomechanischen Bildderotators mit einer 6-Achsen-Parallelkinematik, 7. Workshop Optische Technologien, 26. November, Hannover

Rohloff, B., Schwarzendahl, S., Wallaschek, J., Reithmeier, E. (2013): Schwingungsanalyse von rotierenden Objekten mit einem optomechniaschen Bildderotator, 3. VDI-Fachtagung Schwingungsanalyse & Identifikation, Leonberg, S. 203-211, ISBN 978-3-18-092191-4

Scheuer R., Mueller T., Reithmeier E. (2013): Development of a Fast Measurement System for Microstructured Surfaces, OSA Imaging and Applied Optics, Arlington (VA)

sonstige Veröffentlichungen

Scheuer, R., Reithmeier, E. (2013): Three Dimensional Surface Reconstruction Using Scanning Electron Microscopy, Scientific Reports 2011-2013 Institute of Measurement and Automatic Control

Scheuer, R., Reithmeier, E. (2013): Quantification of the Degradation of Microstructured Coatings. Clean Sky Project "Microcoat", Scientific Reports 2011-2013 Institute of Measurement and Automatic Control