Publikationen

Konferenzen

  • Bossemeyer, H.; Kästner, M.; Reithmeier, E. (2023): An extended model for the kinematic identification of a tiltable laser plane in adaptive light-section triangulationSPIE Optical Metrology, 2023, Munich, Germany, Proceedings Volume 12618, Optical Measurement Systems for Industrial Inspection XIII; 126181T (2023)
    DOI: 10.1117/12.2673846
  • Bossemeyer, H.; Kästner, M.; Reithmeier, E. (2023): Identifikation der Hand-Auge-Korrespondenz durch Pose-Graph-basierte Referenzposenoptimierung124. Jahrestagung der DGaO, DGaO-Proceedings 2023
    ISSN: 1614-8436
  • Hedrich, K.; Hinz, L.; Reithmeier, E. (2023): Improved segmentation of damages on high-resolution coating images using CNN-based ensemble learningSPIE Optical Metrology, 2023, Munich, Germany Proceedings Volume 12623, Automated Visual Inspection and Machine Vision V; 126230A (2023)
    DOI: 10.1117/12.2673821
  • Kern, P.; Hinz, L.; Kästner, M.; Reithmeier, E. (2023): Identification and Correction of Magnification Factor Deviations of a Telecentric Fringe Projection SystemProc. SPIE 12618, Optical Measurement Systems for Industrial Inspection XIII, 126180I (15 August 2023), SPIE Optical Metrology, München
    DOI: 10.1117/12.2673617
  • Kern, P.; Middendorf, P.; Hinz, L.; Kästner, M.; Reithmeier, E. (2023): Kalibrierung eines multiskaligen telezentrischen Streifenprojektionssensors124. Jahrestagung der DGaO vom 31.05. - 03.06.2023, Berlin; http://www.dgao-proceedings.de; https://www.dgao-proceedings.de/download/124/124_a24.pdf
    ISSN: 1614-8436
  • Siemens, S. Kästner, M. Reithmeier, E. (2023): Non-Overlap Image RegistrationSMSI - Sensor and Measurement Science International 2023, 2023-05-08 - 2023-05-11, Nürnberg
    DOI: 10.5162/SMSI2023/P01
    ISBN: 978-3-9819376-8-8
  • Siemens, S.; Kästner, M.; Reithmeier, E. (2023): Noise-robust registration of microscopic height data using convolutional neural networksProceedings Volume 12327, SPIE Future Sensing Technologies 2023
    DOI: 10.1117/12.2644620
  • Siemens, S.; Kästner, M.; Reithmeier, E. (2023): Synthetically generated microscope images of microtopographies using stable diffusionSPIE Optical Metrology, 2023, Munich, Germany, Proceedings Volume 12623, Automated Visual Inspection and Machine Vision V; 1262309 (2023)
    DOI: 10.1117/12.2673643
  • Hedrich, K.; Hinz, L.; Melchert, N.; Wiese, L.; Reithmeier, E. (2022): Pose estimation of optical resonators using convolutional neural networks in a simulation environmentSPIE Optical Engineering + Applications, 2022, San Diego, California, United States
    DOI: 10.1117/12.2633416
  • Hedrich, K.; Hinz, L.; Reithmeier. E. (2022): Damage segmentation using small convolutional neuronal networks and adversarial training methods on low-quality RGB video dataSPIE OPTO: AI and Optical Data Sciences III
    DOI: 10.1117/12.2610123
  • Middendorf, P; Rothgänger, M.; Peddinghaus, J.; Brunotte, K.; Uhe, J.; Behrens, B.A.; Quentin, L.; Kästner, M.; Reithmeier, E. (2022): In Situ Wear Measurement of Hot Forging Dies Using Robot Aided Endoscopic Fringe ProjectionKey Engineering Materials
    DOI: 10.4028/p-k81788
  • Nils Melchert, Jérôme Degallaix, Lennart Hinz, Eduard Reithmeier (2022): GPU implementation of FSR simulations: performance improvements and limitationsProceedings Volume 12225, Optics and Photonics for Information Processing XVI; 122250E (2022)
    DOI: 10.1117/12.2633434
  • Bossemeyer, H.; Ahlborn, P.; Kästner, M.; Reithmeier, E. (2021): Model-based adaptive estimation of camera matrices for variable-focus optical metrology applications122. Jahrestagung der DGaO, DGaO Proceedings 2021
    ISSN: 1614-8436
  • Bossemeyer, H.; Kästner, M.; Reithmeier, E. (2021): Robust and sub-pixel accurate wavelet-based segmentation of laser lines formed by lenticular lensesSPIE Optical Metrology, 2021, Online Only, Proceedings Volume 11782, Optical Measurement Systems for Industrial Inspection XII; 1178218
    DOI: https://doi.org/10.1117/12.2592657
  • Hedrich, K.; Kästner, M.; Middendorf, P.; Reithmeier, E. (2021): Miniaturization of borescopic fringe projection systems for the inspection in confined spaces: a methodical analysisSPIE OPTO, 2021
    DOI: https://doi.org/10.1117/12.2583148
  • Lennart Hinz, Markus Kästner and Eduard Reithmeier (2021): Impact of multireflections on measurement accuracy in the endoscopic 3D reconstruction of gearing geometriesSPIE Optical Metrology: Optical Measurement Systems for Industrial Inspection XII | File |
    DOI: 10.1117/12.2592599
  • Lennart Hinz, Markus Kästner and Eduard Reithmeier (2021): Adaptive camera calibration for a focus adjustable liquid lens in fiber optic endoscopySPIE Optics + Optoelectronics, Nonlinear Optics and Applications XII | File |
    DOI: 10.1117/12.2592653
  • Lennart Hinz, Markus Kästner, Eduard Reithmeier (2021): Improved defect segmentation by combining fiber optic fringe projection profilometry with directional variable brightfield illuminationSPIE OPTO, 2021; Proceedings Volume 11698, Emerging Digital Micromirror Device Based Systems and Applications XIII
    DOI: 10.1117/12.2578564
  • Middendorf, P.; Kern, P.; Melchert, N.; Kästner, M.; Reithmeier, E. (2021): A GPU-based ray tracing approach for the prediction of multireflections on measurement objects and the a priori estimation of low-reflection measurement poses SPIE Optical Metrology, 2021
    DOI: https://doi.org/10.1117/12.2592565
  • Altmann, B.; Reithmeier, E. (2020): Investigation of harmful slip in a rolling bearing using a thermographic camera with a derotatorInfrared Sensors, Devices, and Applications X, Vol. 11503, International Society for Optics and Photonics
    DOI: 10.1117/12.2568036
  • Beermann, R.; Bossemeyer, H.; Diekmann, R.; Kästner, M.; Reithmeier, E. (2020): Model-based calibration routine for a triangulation sensor for inner radius measurements of cylindrical componentsSPIE Photonics Europe 23. March - 02. April 2020, Strasbourg, France
    DOI: 10.1117/12.2552729
  • Beermann, R.; Quentin, L.; Kästner, M.; Reithmeier, E. (2020): Affine structured light sensor for measurements through inspection windows: basic concept and direct calibration approachSPIE Photonics Europe 23. March - 02. April 2020, Strasbourg, France
    DOI: 10.1117/12.2556081
  • Betker, T.; Kästner, M.; Reithmeier, E. (2020): 3D registration of multiple surface measurements using projected random patternsSPIE Photonics Europe 23. March - 02. April 2020, Strasbourg, France (accepted, not published yet)
  • Hinz, L.; Kästner, M.; Reithmeier, E. (2020): Adaptive merging of large datasets of a 3D measuring endoscope in an industrial environmentSPIE Photonics Europe 23. March - 02. April 2020, Strasbourg, France | File |
    DOI: 10.1117/12.2553939
  • Höber, S.; Pape, C.; Reithmeier, E. (2020): Movable Quiet Zones for Permanent Noise ReductionFortschritte der 46. Jahrestagung für Akustik (DAGA 2020), 32-35
    ISBN: 978-3-939296-17-1
  • Lennart Hinz, Robert Schulte, Markus Kästner, Eduard Reithmeier (2020): High-Resolution Inspection of Tools for Novel Forming Processes by an Endoscopic Fringe Projection SystemConference: 3D Image Acquisition and Display: Technology, Perception and Applications
    DOI: 10.1364/3D.2020.DF3A.4
  • Melchert, N.; Kästner, M.; Reithmeier, E. (2020): Robot-assisted BRDF measurement and surface characterization of inhomogeneous freeform shapesSPIE Photonics Europe 23. March - 02. April 2020, Strasbourg, France
    DOI: 10.1117/12.2555808
  • Middendorf, P.; Kästner, M.; Reithmeier, E. (2020): Integration of an endoscopic fringe projection system into a milling machine for the regeneration of complex capital goods: a first prototypeSPIE Photonics Europe 2020
    DOI: 10.1117/12.2555767
  • Quentin, L.; Beermann, R.; Brunotte, K.; Behrens, B.-A.; Kästner, M.; Reithmeier, E. (2020): Concept of a control system based on 3D geometry measurement for open die forging of large-scale componentsSPIE Photonics Europe
    DOI: https://doi.org/10.1117/12.2554720
  • Siemens, S.; Kästner, M.; Reithmeier, E. (2020): Super-resolution for 2.5D height data of microstructured surfaces using the vdsr networkEuropean Optical Society Biennial Meeting (EOSAM) 2020
    DOI: 10.1051/epjconf/202023806014
  • Beermann, R.; Quentin, L.; Kästner, M.; Reithmeier, E. (2019): Structured light sensor with telecentric stereo camera pair for measurements through vacuum windowsSPIE Optical Metrology 24.-27. June 2019, Munich, Germany
    DOI: 10.1117/12.2526049
  • Quentin, L.; Kruse, J.; Beermann, R.; Reinke, C.; Langner, J.; Stonis, M.; Kästner, M.; Reithmeier, E. (2019): Analysis of Mapped Temperature Data on Geometry Points to Characterise the Influence of Temperature Deviations on Cross-Wedge RollingESAFORM, AIP Conference Proceedings, vol. 2113, nr.1, pages 040018 (2019)
    DOI: 10.1063/1.5112552
  • Schindlbeck C.; Pape, Ch.; Reithmeier, E. (2019): Predictive tolerance bands for the correction-less assembly of optical systemsSPIE Optics + Photonics, Optical Modeling and System Alignment, 111030B | File |
    DOI: 10.1117/12.2527659
  • Töberg, S.; Reithmeier, E. (2019): Dense structure and motion recovery from scanning electron microscope image sequences based on factorizationInternational Conference on Machine Vision (ICMV), 16.-18. November 2019, Amsterdam, Niederlande
    DOI: 10.1117/12.2556372
  • Töberg, S.; Reithmeier, E. (2019): Accuracy estimation of a 3D reconstruction method for scanning electron microscope imagesProc. SPIE 11142, Optical Technology and Measurement for Industrial Applications Conference, OPIC International Congress, 22.-26. April 2019, Yokohama, Japan
    DOI: 10.1117/12.2535570
  • Altmann,B.; Pape, Ch.; Reithmeier, E. (2018): Determining angular velocities of fast rotating objects based on motion blur to control an optomechanical derotatorProceedings in Applied Mathematics and Mechanics 2018
  • Beermann, R.; Quentin, L.; Reithmeier, E.; Kästner, M. (2018): 2D refractive index field measurements in air in different pressure scenarios In: Proceedings of SPIE 10819, SPIE Photonics 11. – 13. October 2018, Beijing, China, pp. 108190E-1 - 108190E-8.
    DOI: 10.1117/12.2500315
  • Dietz, A., Hienzsch, J., Reithmeier, E. (2018): Contactless Hand Identification using Machine LearningCMBBE 2018 - 15th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering and 3rd Conference on Imaging and Visualization | File |
    ISBN: 978-989-99424-6-2
  • Dietz, A., Pösch, A., Reithmeier, E. (2018): Hand hygiene monitoring based on segmentation of interacting hands with convolutional networksProc. SPIE 10579, Medical Imaging 2018: Imaging Informatics for Healthcare, Research, and Applications, 1057914 | File |
    DOI: 10.1117/12.2294047
  • Höber, S., Pape, C., Reithmeier, E. (2018): Positionsadaptive Lärmreduktion mittels Model-Lookup-ControlFortschritte der 44. Jahrestagung für Akustik (DAGA 2018), 567-570
    ISBN: 978-3-939296-13-3
  • Kröger, N.; Reithmeier, E. (2018): Thickness Measurement of Transparent Coatings Based on Polarization Effects at Dielectric SurfacesEuropean Optical Society Biennial Meeting (EOSAM) 2018 | File |
  • Schindlbeck C.; Pape, Ch.; Reithmeier, E. (2018): Wavefront predictions for the automated assembly of optical systemsProc. SPIE, Optical Design and Testing VIII, 108150B | File |
    DOI: 10.1117/12.2500000
  • Schindlbeck, C.; Pape, Ch.; Reithmeier, E. (2018): Sensitivity Analysis of a Two-Lens System for Positioning FeedbackPAMM Proc. Appl. Math. Mech. | File |
    DOI: 10.1002/pamm.201800062
  • Töberg, S.; Reithmeier, E. (2018): 3D reconstruction of particle agglomerates using multiple scanning electron microscope stereo-pair imagesProc. SPIE 10819, Optical Metrology and Inspection for Industrial Applications V, SPIE Photonics 11.-13. October 2018, Beijing, China
    DOI: 10.1117/12.2502485
  • Yin, Y.; Altmann, B.; Pape, C.; Reithmeier, E. (2018): Rotation axis estimation for the derotator calibration with machine vision measurement of the auxiliary laserProceedings Volume 10819, Optical Metrology and Inspection for Industrial Applications V; 108190S (2018)
    DOI: https://doi.org/10.1117/12.2500549
  • Yin, Y.; Altmann, B.; Pape, C.; Reithmeier, E. (2018): Rotation axis estimation for the derotator calibration with machine vision measurement of the auxiliary laserProceedings Volume 10819, Optical Metrology and Inspection for Industrial Applications V; 108190S (2018)
    DOI: https://doi.org/10.1117/12.2500549
  • Altmann, B.; Pape, Ch.; Reithmeier, E. (2017): Digital image processing algorithms for automated inspection of dynamic effects in roller bearingsAutomated Visual Inspection and Machine Vision II
  • Altmann, B.; Pape, Ch.; Reithmeier, E. (2017): Temperature measurements on fast-rotating objects using a thermographic camera with an optomechanical image derotatorProceedings of SPIE Optics + Photonics 2017
  • Altmann,B.; Pape, Ch.; Reithmeier, E. (2017): Implementing an image based control algorithm for an optomechanical image derotatorProceedings in Applied Mathematics and Mechanics 2017
  • Beermann, R.; Quentin, L.; Kästner, M.; Pösch, A.; Reithmeier E. (2017): Simulation of Light Deflection Due to an Inhomogeneous Refractive Index Field Induced by a Hot Measurement ObjectIn: Proceedings of the 118th Annual Meeting of DGaO, DGaO 06. - 10. Juni 2017, Dresden, Deutschland, A20-9, ISSN: 1614-8436, https://www.dgao-proceedings.de/download/118/118_a20.pdf
  • Beermann, R.; Quentin, L.; Pösch, A.; Reithmeier, E.; Kästner, M. (2017): Light section measurement to quantify the accuracy loss induced by laser light deflection in an inhomogeneous refractive index field In: Proceedings of SPIE 10329, SPIE Optical Metrology 25. - 29. June 2017, Munich, Germany, pp. 103292T-1-103292T-7.
    DOI: 10.1117/12.2269724
  • Diaz, M.R.; Mohwald, K.; Loftfield, N.; Kastner, M.; Reithmeier, E.; Knigge, S.; Glasmacher, B.; Maier, H.J. (2017): Transpiring thermally sprayed alumina layers with integrated fluid flow tubesProceedings of the International Thermal Spray Conference
  • Gorschenew, W.; Kästner, M.; Reithmeier, E. (2017): Flexible registration method for light-stripe sensors considering sensor misalignmentsOptical Measurement Systems for Industrial Inspection X, Proc. of SPIE Vol. 10329, Hrsg.: Lehmann P.; Osten, W.; Gonçalves Jr., A.A. | File |
    DOI: 10.1117/12.2269986
  • Höber, S.; Pape, C.; Reithmeier, E. (2017): Generating a Position-Adaptive Quiet Zone in Enclosed SpacesProc. of the Inter-Noise 2017 - 46th International Congress and Exposition on Noise Control Engineering, 2713-2721 | File |
    ISBN: 9781510852389
  • Jochen Schlobohm, Oliver Bruchwald, Wojciech Frąckowiak, Yinan Li, Markus Kästner, Andreas Pösch, Wilfried Reimche, Hans Jürgen Maier, Eduard Reithmeier (2017): Advanced characterization techniques for turbine blade wear and damageProcedia CIRP | File |
    DOI: 10.1016/j.procir.2016.09.005
    ISBN: 2212-8271
  • Loftfield, N.; Kästner, M.; Reithmeier, E. (2017): 3D registration of depth data of porous surface coatings based on 3D phase correlation and the trimmed ICP algorithmProc. SPIE 10333, Optical Methods for Inspection, Characterization, and Imaging of Biomaterials III
    DOI: 10.1117/12.2269781
  • Loftfield, N.; Kästner, M; Reithmeier, E. (2017): Nonlinear anisotropic diffusion filtering for the characterization of stochastic structured surfacesProceedings | The Joint IMEKO 2017 TC1 – TC7 – TC13 Symposium 2017 von 31. July bis 3. August in Rio de Janeiro
  • Loftfield, N.; Kästner, M; Reithmeier, E. (2017): 3D reconstruction and characterization of the porous microstructure of Al2O3-coatings based on surface dataEngineering for a Changing World: Proceedings; 59th IWK, Ilmenau Scientific Colloquium, Technische Universität Ilmenau, Vol. 59, 2017, H. 1.1.10 (20.10.2017)
  • Quentin, L.; Beermann, R.; Pösch, A.; Reithmeier, E.; Kästner, M. (2017): 3D geometry measurement of hot cylindric specimen using structured lightIn: Proceedings of SPIE 10329, SPIE Optical Metrology 25. – 29. June 2017, Munich, Germany, pp. 103290U-1-103290U-6.
    DOI: 10.1117/12.2269607
  • Schindlbeck C.; Pape, Ch.; Reithmeier, E. (2017): Two Degree-Of-Freedom Online Compensation of a Piezoelectric Micro-Positioning UnitPAMM · Proc. Appl. Math. Mech. 17(1):815-816 | File |
    DOI: 10.1002/pamm.201710375
  • Schindlbeck, C.; Janz, A.; Pape, Ch.; Reithmeier, E. (2017): Increasing Milling Precision for Macro-Micro-Manipulators with Disturbance Rejection Control via Visual FeedbackProc. of the IEEE International Conference on Intelligent Robots and Systems (IROS) 2017 | File |
    DOI: 10.1109/IROS.2017.8206340
    ISBN: 2153-0866
  • Schindlbeck, C.; Pape, Ch.; Reithmeier, E. (2017): Recursive Online Compensation of Piezoelectric Nonlinearities via a Modified Prandtl-Ishlinskii ApproachProc. of the 20th IFAC World Congress | File |
    DOI: 10.1016/j.ifacol.2017.08.1881
  • Altmann, B.; Rohloff, B.; Pape, Ch.; Reithmeier, E. (2016): Identification and Tracking-Control for an Optomechatronical Image Derotator Using Neural Networks PAMM · Proc. Appl. Math. Mech.
    DOI: 10.1002/pamm.201610386
  • Altmann, B.; Rohloff, B.; Pape, Ch.; Reithmeier, E. (2016): Vibration Measurements of Rotating Objects Using an Optomechatronical Image Derotator 117. Jahrestagung der DGaO vom 17. bis 21. Mai 2016 in Hannover | File |
  • Dietz, A., Schröder, S., Pösch, A., Frank, K., Reithmeier, E. (2016): Contactless Surgery Light Control based on 3D Gesture RecognitionGCAI 2016. 2nd Global Conference on Artificial Intelligence, EPiC Series in Computing, volume 41, pages 138-146, 2016 | File |
    DOI: 10.29007/zmz9
    ISBN: 2398-7340 (ISSN)
  • Gorschenew, W.; Reithmeier, E. (2016): Calibration of multiple light stripe sensors to create a multi-sensor system for the 3D measurement of complex macro geometries117. Jahrestagung der DGaO vom 17. bis 21. Mai 2016 in Hannover, ISSN: 1614-8436, P22
  • Höber, S., Pape, C., Reithmeier, E. (2016): Automatic Stabilization of an Adaptive Feedback Control for Noise Cancelling In-Ear HeadphonesProc. of the Inter-Noise 2016 - 45th International Congress and Exposition on Noise Control Engineering, 444-452 | File |
    ISBN: 978-3-939296-11-9
  • Kröger, N.; Schlobohm, J.; Pösch, A.; Reithmeier, E. (2016): Using Refraction in Thin Glass Plates for Optical Path Length Modulation in Low Coherence InterferometryEuropean Optical Society Annual Meeting (EOSAM) 2016 | File |
  • Li, Y.; Bossemeyer, H.; Kästner, M.; Reithmeier, E. (2016): Development of an edge sensor based on polyview optics and laser triangulation principleSPIE/COS Photonics Asia, 2016, Beijing, China, Proceedings Volume 10023, Optical Metrology and Inspection for Industrial Applications IV; 100231E
    DOI: https://doi.org/10.1117/12.2247007
  • Li,Y.; Bossmeyer, H.; Kästner, M.; Reithmeier, E. (2016): Development of an edge sensor based on polyview optics and laser triangulation principleIn SPIE/COS Photonics Asia (pp. 100231E-100231E). International Society for Optics and Photonics 2016.
    DOI: doi:10.1117/12.2247007
  • Li,Y.; Kästner, M.; Reithmeier, E. (2016): Edge measurement based on multi laser triangulation sensors117. Jahrestagung der DGaO vom 17. bis 21. Mai 2016 in Hannover
  • Loftfield, N.; Kästner, M.; Reithmeier, E. (2016): The impact of different data filters on the characterization of porous surfaces117. Jahrestagung der DGaO vom 17. bis 21. Mai 2016 in Hannover | File |
  • Mueller, T. , Poesch, A. and Reithmeier, E. (2016): Laser triangulation in harsh industrial conditions117. Jahrestagung der DGaO vom 17. bis 21. Mai 2016 in Hannover
  • Zou, Y.; Kästner, M.; Reithmeier, E. (2016): Wear Process Monitoring of thermal spray coatings and surface topography analysis using a confocal laser scanning microscopy117. Jahrestagung der DGaO vom 17. bis 21. Mai 2016 in Hannover
  • Höber, S., Pape, C., Reithmeier, E. (2015): Echtzeit-Detektion von instabilem RegelkreisverhaltenFortschritte der 41. Jahrestagung für Akustik (DAGA 2015), 1146-1149 | File |
    ISBN: 978-3-939296-08-9
  • Jochen Schlobohm, Andreas Pösch, Eduard Reithmeier (2015): A rigid borescopic fringe projection system for 3D measurement for hard to access areas and limited space – ViboscopCMSC 2015
  • Li, Y., Kästner, M., & Reithmeier, E. (2015): Development of a compact low coherence interferometer based on GPGPU for fast microscopic surface measurement on turbine bladesSPIE Optical Metrology 2015, Proc. SPIE 9525, Optical Measurement Systems for Industrial Inspection IX, 95250R (pp. 95250R-95250R), Munich
    DOI: 10.1117/12.2184749
  • Li, Y., Kästner, M., Reithmeier, E. (2015): Compact Optical Sensor for the Measurement of Surface Microtopographies on Turbine BladesAMA Conference 2015, Proceedings SENSOR 2015, Nürnberg, Germany
    DOI: 10.5162/sensor2015/C6.3
    ISBN: 978-3-9813484-8-4
  • Matthias, S.; Kästner, M.; Reithmeier, E.; Sieczkarek, P.; Tekkaya, A. (2015): Forming tool inspection using fiber-optic sensor headsVipImage 2015
  • Matthias, S.; Schlobohm, J.; Kästner, M.; Reithmeier, E (2015): Gegenüberstellung zweier Messsysteme zur Geometrieerfassung mittels strukturierter Beleuchtung7. VDI-Fachtagung Messunsicherheit 2015
  • Mueller, T., Pösch, A., Reithmeier, E. (2015): Microscopic laser triangulation in harsh industrial conditionsOptimess 2015, Antwerpen
  • Engelke, F., Kästner, M., Reithmeier, E. (2014): Vergleichbarkeitsuntersuchung von optischen und taktilen Messgeräten bezüglich der ISO 25178Deutsche Gesellschaft für angewandte Optik, 115. Jahrestagung
  • Jochen Schlobohm, Andreas Pösch, Markus Kästner, Eduard Reithmeier (2014): On the development of a low-cost rigid borescopic fringe projection systemProc. of SPIE Vol. 9450 | File |
    DOI: 10.1117/12.2067310
  • Matthias, S.; Kästner, M.; Reithmeier, E. (2014): Camera and projector calibration of an endoscopic fringe projection system.Proceedings of 11th IMEKO Symposium LMPMI2014 (Laser Metrology for Precision Measurement and Inspection in Industry) ISBN 978-92-990075
  • Mueller T., Langmann B., Reithmeier E. (2014): Development of a measurement system for the online inspection of microstructured surfaces in harsh industrial conditionsProc. SPIE 9141, Optical Sensing and Detection III, 91411F (May 15, 2014)
  • Pösch, A.; Kästner, M.; Reithmeier, E. (2014): Fringe projection measurement of highly specular objects in presence of multi-reflectionComputation Vision and Medical Image Processing IV, ISBN 978-1-138-00081-0
  • Reithmeier, E.; Kästner, M.; Matthias, S.; Schlobohm, J. (2014): Endoskopische 3D-Messtechnik DGaO 115. Jahrestagung
  • Renke Scheuer, Eduard Reithmeier (2014): Three Dimensional Surface Reconstruction using Scanning Electron Microscopy and the Design of a Nanostructured Electron TrapProceedings of SPIE Scanning Microscopies 2014 | File |
  • Schröder, S.; Loftfield, N.; Langmann, B.; Frank, K.; Reithmeier, E. (2014): Contactless Operating Table Control based on 3D Image Processing36th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC´14), August 26-30, 2014, Chicago | File |
  • Thomas Müller, Renke Scheuer und Eduard Reithmeier (2014): Optische Kontrolle mikrostrukturierter Oberflächen im industriellen Umfeld Mikroskopie Trends 14
  • Yibo Zou, Markus Kästner, Eduard Reithmeier (2014): Characterization of porous surfaces with spatial point pattern analysisSPIE Photonics Prague 2014 | File |
  • Yibo Zou, Markus Kästner, Eduard Reithmeier (2014): Multiskalenmethode zur dimensionellen Charakterisierung von porösen Oberflächen DGaO 115. Jahrestagung | File |
  • Christoph Ohrt, Andreas Pösch, Dr. Markus Kästner, Prof. Eduard Reithmeier (2013): One Image Fibrescopic Finge Projection with Inverse Approach11th International Symposium on Measurement and Quality Control 2013, September 11-13, 2013, Cracow-Kielce, Poland
  • Christoph Ohrt, Andreas Pösch, Markus Kästner, Eduard Reithmeier (2013): Potentials of Endoscopic Fringe Projection - A Differetiation of Measuring Video-, Fiber- and BorescopyFringe 2013, 7th International Workshop on Advanced Optical Imaging and Metrology, ISBN 978-3-642-36358-0, DOI: 10.1007/978-3-642-36359-7_135
  • Engelke, F., Kästner, M., Reithmeier, E. (2013): Measurement based simulation of microscope deviations for evaluation of stitching algorithms for the extension of Fourier-based alignmentSPIE Optical Metrology 2013. International Society for Optics and Photonics, 2013 | File |
  • Engelke, F., Kästner, M., Reithmeier, E. (2013): 3D - Reconstruction of Microstructures on Cylinder LinersProc. 13th Int. Conf. of the EUSPEN, 2013, S. 132-135 | File |
  • Engelke, F., Kästner, M., Reithmeier, E. (2013): Verbessertes Stitching von 3D-Mikroskopiedaten auf Grundlage von SimulationsergebnissenDeutsche Gesellschaft für angewandte Optik, 114. Jahrestagung
  • Kästner, M.; Hausotte, T.; Reithmeier, E.; Loderer, A.; Ohrt, C.; Sieczkarek, P. (2013): Fertigungsnahe Qualitätskontrolle von Werkzeug und Werkstück2. Workshop Blechmassivumformung, 2(2013)1, Meisenbach GmbH Verlag, S. 101-119
  • Krauß, M.; Kästner, M., Reithmeier, E. (2013): Data quality estimation from interdependencies for structural light scannersComputational Vision and Medical Image Processing: Vip Image 2013 ISBN: 978113800081
  • Ohrt C., Kästner M., Reithmeier E. (2013): Fibrescopic Micro Fringe ProjectionMetromeet 2013 - 9th International Conference on Industrial Dimensional Metrology (Invited Talk)
  • Ohrt, C.; Kästner, M.; Reithmeier, E. (2013): Fiberskopische Geometriemessung auf Basis der Streifenprojektion114. JAHRESTAGUNG VOM 21. BIS 25. MAI 2013 IN BRAUNSCHWEIG
  • Ohrt, C.; Kästner, M.; Reithmeier, E. (2013): High resolution measurements of filigree, inner geometries with endoscopic micro fringe projectionSPIE Optical Metrology 2013, München, S. 878817-1 doi: 10.1117/12.2020440
  • Pösch, A.; Kästner, M.; Reithmeier, E. (2013): Fringe projection measurement of highly specular objects in presence of multi-reflectionVIP Image, Funchal
  • Priese S., Bruhnken C., Voss D., Peissig J., Reithmeier E. (2013): The Need for Psychoacoustics in Active Noise ControlAIA-DAGA 2013 Merano, 39. Jahrestagung für Akustik S. 1710-1713, ISBN 978-3-939296-05-8 | File |
  • Rohloff, B., Mueller, A., Vynnyk, T., Pape, C., Reithmeier, E. (2013): Calibration of the Optical Axes of an Image Derotator Using Image Processing and a 6-Axes Parallel Kinematics114. Jahrestagung der Deutschen Gesellschaft für angewandte Optik, 21.-25. Mai, Braunschweig | File |
  • Rohloff, B., Pape, C., Reithmeier, E.: (2013): Bildrückgeführte Kalibrierung eines optomechanischen Bildderotators mit einer 6-Achsen-Parallelkinematik7. Workshop Optische Technologien, 26. November, Hannover
  • Rohloff, B., Schwarzendahl, S., Wallaschek, J., Reithmeier, E. (2013): Schwingungsanalyse von rotierenden Objekten mit einem optomechniaschen Bildderotator3. VDI-Fachtagung Schwingungsanalyse & Identifikation, Leonberg, S. 203-211, ISBN 978-3-18-092191-4 | File |
  • Bruhnken C., Priese S., Foudhaili H., Voss D., Reithmeier E., Peissig J. (2012): Feedback-Reglerauslegung für aktive Lärmkompensation bei In-Ear-KopfhörernDAGA 2012 - Darmstadt, 38. Jahrestagung für Akustik, S.757-758, ISBN 978-3-939296-04-1 | File |
  • E. Reithmeier, T. Vynnyk, R. Scheuer (2012): 3D-Object/Surface Measurement using a SEM with 4 Everhart-Thornley Detectors6th Sino-German Symposium on Micro- and Nano- Production, Measurement and Application
  • Krauß, M., Kästner, M., Reithmeier, E (2012): Evaluation of Worn Surfaces Using Directional IlluminationOptimess 2012, Antwerpen
  • Krauß, M., Kästner, M., Reithmeier, E. (2012): Multi-Scale Inspection of Worn Surfaces for Product RegenerationCMSC 2012, New Orleans
  • Lietmeyer, C.; Seume, J. R.; Scheuer, R.; Vynnyk, T.; Reithmeier, E., Krawczyk, T.; Denkena, B.; Wojakowski, B.; Kling, R.; Overmeyer, L. (2012): RECENT ADVANCES IN MANUFACTURING OF RIBLETS ON COMPRESSOR BLADES AND THEIR AERODYNAMIC IMPACTProceedings of the ASME Turbo Expo, 11-15 June 2012, Copenhagen, Denmark, GT2012-69067 | File |
  • Ohrt C., Kästner M., Reithmeier E. (2012): A device for endoscopic measurements of forming tools with filigree side elementsOptimess 2012 Antwerpen
  • Ohrt, C.; Hartmann, W.; Weickmann, J.; Kästner, M.; Weckenmann, A.; Hausotte, T.; Reithmeier, E. (2012): Holistic measurement in the sheet-bulk metal forming process with fringe projectionProcceedings ESAFORM 15th ESAFORM conference (March, 14th - 16th,2012) pp 1005-1010
  • Ohrt, C.; Kästner, M.; Reithmeier E. (2012): Fast Endoscopic Geometry Measurement with Fibre Based Fringe Projection for Inner GeometriesCMSC 2012
  • Pösch, A.; Vynnyk, T.; Reithmeier, E. (2012): Fast Detection of Geometry Defects on Free Form Surfaces Using Inverse Fringe ProjectionCoordinate Systems Metrology Conference 2012, New Orleans, USA
  • Pösch, A.; Vynnyk, T.; Reithmeier, E. (2012): Using inverse fringe projection to speed up the detection of local and global geometry defects on free-form surfacesProceedings of SPIE, Vol. 8500, ISBN: 9780819492173, DOI: 10.1117/12.928700
  • Priese, S.; Bruhnken, C.; Voss, D.; Foudhaili, H.; Reithmeier, E.; Peissig, J. (2012): Aktive Schallreduktion mit OhrkanalhörernDAGA 2012 - Darmstadt; 38. Jahrestagung für Akustik, S.763-764, ISBN 978-3-939296-04-1 | File |
  • Priese, S.; Bruhnken, C.; Voss, D.; Peissig, J.; Reithmeier, E. (2012): Adaptive feedforward control for active noise cancellation in-ear headphones164th Meeting of the Acoustical Society of America; Proceedings of Meetings on Acoustics, Volume 18, 2012 | File |
  • Reithmeier E., Ohrt C., Kästner M. (2012): Fast Endoscopic Geometry Measurement of Sheet-Bulk Metal Formed PartsCIRP January Meeting 2012
  • Denkena, B.; Gümmer, O.; Gillhaus, R.; Kästner, M.; Reithmeier, E. (2011): Precise Alignment of Precision Forged Crankshafts in a Grinding MachineProceedings of the euspen 11th International Conference, Vol. 2, pp. 418–421, 2011 | File |
  • Haskamp, K.; Kästner, M.; Reithmeier, E. (2011): Fast Virtual Shadow Projection as Part of a Virtual Multisensor Assistance SystemSPIE Optical Metrology 2011, München, S. 80830G | File |
  • Haskamp, K.; Kästner, M.; Reithmeier, E. (2011): Accurate Calibration of a Fringe Projection System by Considering TelecentricitySPIE Optical Metrology 2011, München, S. 80821B | File |
  • Hoheisel, D., Schultheis, T., Spani Molella, L., Reithmeier, E., Rissing, L. (2011): Konzept und Fertigung von Komponenten eines ferrofluidischen Mikroaktors,Proceedings of the MST-Congress 2011, 10.-12. Oktober 2011, Darmstadt, VDE Verlag: Berlin Offenbach, 2011, pp. 273-276, ISBN 978-3-8007-3367-5
  • Ohrt C., Kästner M., Reithmeier E. (2011): Adaption of beamshaping techniques for a new kind of laser ilummination of micro fringe projection systems10 th IMEKO Symposium Laser Metrology for Precision Measurement and Inspection in Industry (LMPMI) 2011 VDI-Berichte 2156, S. 177-184
  • Ohrt, C.; Gillhaus, R.; Haskamp, K.; Kästner, M.; Reithmeier E. (2011): Endoskopische Laserstreifenprojektion Kaiser Friedrich Forschungspreis 2011 InnovationsForum Optische Sensorik 10. Mai 2011 Kaiserpfalz/Goslar S.85-86
  • Ohrt, C.; Kästner, M.; Reithmeier, E. (2011): Endoscopic geometry inspection by modular fiber-optic sensors with increased depth of focusSPIE Optical Metrology 2011, München, S. 808215 | File |
  • Reithmeier E., Weckenmann A., Behrens B.-A., Ohrt C., Kästner M., Akkasoglu G., Cahyono T., Hübner S., Krimm R., Salfeld V., Voges-Schwieger K., Vucetic M. (2011): Qualitätsorientierte Entwicklung der Blechmassivumformung1. Workshop Blechmassivumformung Tagungsband, Erlangen, 13. Oktober 2011, S. 97 - 118, ISBN 978-3-87525-321-4
  • Schultheis, T.; Spani Molella, L.; Reithmeier, E. (2011): Optical Measurement on a Small Aperture Liquid Lens, Proceedings of the 4th EOS Topical Meeting on Optical Microsystems (OµS'11), Capri, Italy, 26 - 28 September 2011, ISBN 978-3-00-033710-9
  • Schultheis, T.; Spani Molella, L.; Reithmeier, E. (2011): An Innovative Concept of a Magnetically Driven Liquid LensProceedings of the EOS Conferences at the World of Photonics Congress 2011, München, 23. - 25. Mai 2011, ISBN: 978-3-00-033713-0
  • Vynnyk, T.; Scheuer, R.; Reithmeier, E. (2011): 3D-measurement using a scanning electron microscope with 4 Everhart-Thornley detectors Proceedings of 2011 Defense, Security and Sensing Conference. Vol. 8036
  • Weckenmann A., Behrens B., Reithmeier E., Akkasoglu G., Vucetic M., Ohrt C., Cahyono T., Hübner S., Kästner M. (2011): Appliance of the maturity method in the develpoment of endoscopic geometry inspection for sheet bulk metal forming toolsCIRP "Total Quality Management-Advanced and Intelligent Approaches" 2011, Belgrad, 6. - 10. Juni 2011,S. 1-8 ISBN: 978-86-7083-727-0
  • Abo-Namous, O.; Kästner, M.; Reithmeier, E.; Nicolaus, M.; Möhwald, K.; Bach, F.-W. (2010): Mechanical Surface Treatment to Obtain Optically Cooperative Surfaces vis-à-vis Fringe ProjectionReflection, Scattering, and Diffraction from Surfaces II, Proc. of SPIE Vol. 7792, 7792OV-1 | File |
  • Bach, F.-W.; Möhwald, K.; Nicolaus, M.; Reithmeier, E.; Kästner, M.; Abo-Namous, O. (2010): Non-Contact Geometry Inspection of Workpieces with Optically Non-Cooperative SurfacesKey Engineering Materials Vol. 438 (2010) pp. 123-129 | File |
  • Bretschneider, M.; Kästner, M.; Reithmeier, E. (2010): Preprocessing of 3D Measurement Data of Microstructures with Large Lateral DimensionsFocus on Microscopy 2010; Shanghai, China, p. 155 | File |
  • Bretschneider, M.; Krauß, M.; Kästner, M.; Reithmeier E. (2010): 3D Measurements of Microstructures with Large Lateral DimensionsProceedings of the 10th International Symposium on Measurement and Quality Control, Osaka, Japan, September 5-9, 2010 | File |
  • Carrasco, J.; Hao, Q.; Kästner, M.; Reithmeier, E. (2010): Measurement of Al–Si Cylinder Liners Using White-light Interferometry and Image Processing on a Coordinate Measuring Machine51. Tribologie-Fachtagung, GfT, 2010, Göttigen, pp. 81/1-81/13 | File |
  • Gillhaus, R.; Pahlke, A.; Kästner, M.; Reithmeier, E. (2010): Messunsicherheitsbetrachtung optischer Abstandssensoren basierend auf der konoskopischen HolographieSensoren und Messsysteme 2010, 18-19.05.2010 Nürnberg, S. 345-352, 2010. | File |
  • Haskamp, K.; Kästner, M.; Reithmeier, E. (2010): Virtuelle Messgeräte als Tool zur Abschätzung von MessunsicherheitenVierter Workshop Optische Technologien, S. 292-300, Hannover, 17.11. - 18.11.2010 | File |
  • Haskamp, K.; Reithmeier, E. (2010): Kinematic Calibration of Small Robotic Work Spaces Using Fringe ProjectionROMANSY 18: Robot Design, Dynamics and Control, S. 275-282, Udine (Italien), 05.07.2010-08.07.2010, Springer WienNewYork ISBN: 9 783 709 102 763 | File |
  • Leis, A.; Kästner, M.; Reithmeier, E. (2010): Oberflächenschadenskontrolle mit dem StreulichtsensorTagungsband des dritten Workshops für Optische Technologien, S. 202-208 | File |
  • Nicolaus, M.; Möhwald, K.; Bach, Fr.-W.; Abo-Namous, O.; Kästner, M.; Reithmeier, E. (2010): Berührungslose Geometrieprüfung endbearbeiteter Bauteile mit optisch nicht kooperativen OberflächenTagungsband zum 13. Werkstofftechnischen Kolloquium in Chemnitz, Bd. 37, S. 313-317
  • Ohrt, C.; Krauß, M.; Kästner, M.; Reithmeier, E. (2010): Optimierung eines endoskopischen StreifenprojektionssystemsVierter Workshop Optische Technologien Tagungsband
  • Pahlke, A.; Kästner, M.; Reithmeier, E. (2010): Fast In-Line Quality Assurance of Gearwheels4th CTI Symposium & Exhibition Automotive Transmission and Drive Trains Proceedings, 8.-9. Juni, Ann Arbor, Michigan, USA, Paper: C9 | File |
  • Pahlke, A.; Kästner, M.; Reithmeier, E. (2010): Fast Algorithms for In-Line Gearwheel Measurements10th International Symposium on Measurement and Quality Control 2010, September 5-9, Osaka, Japan, pp. B2-005-1 - B2-005-4 | File |
  • Pahlke, A.; Kästner, M.; Reithmeier, E. (2010): New Technology for In-Line Quality Improvement of GearwheelsVDI International Conference on Gears. Proceedings, 4.-6. Oktober 2010, München, S. 479 – 486 | File |
  • Pösch A., Vynnyk T., Kästner M., Abo-Namous O., Reithmeier E. (2010): Virtual Inverse Fringe ProjectionCMSC Conference, Reno
  • Schultheis, T.; Fahlbusch, T.; Spani Molella, L.; Reithmeier, E. (2010): Electromagnetic control of microoptics: Adaptive systems based on ferrofluidic actuatorsDritter Workshop Optische Technologien, S. 208-210, Hannover, 23. November 2009, ISBN: 978-3-941416-63-5
  • Schultheis, T.; Spani-Molella, L.; Reithmeier, E. (2010): Determination of the optical properties of a magnetically driven liquid lens by raytracingProceedings of the EOS Annual Meeting (EOSAM 2010), Paris, France, 26th-29th October 2010, ISBN 978-3-00-030509-2 | File |
  • von Hollen, J.; Leis, A.; Poll, G.; Reithmeier, E. (2010): Einfluss von Beschädigungen der Gegenlauffläche auf das tribologische Verhalten von Radialwellendichtringen und Verfahren zur messtechnischen Detektion und Charakterisierung51. Tribologie-Fachtagung, 27. bis 29. September 2010 in Göttingen, S. 1-24
  • Abo-Namous, O.; Kästner, M.; Reithmeier, E. (2009): Interior Geometry Inspection Using Rerouted Fringe ProjectionFringe09, Nürtingen, 13.-16. September 2009, pp. 709 - 712
  • Bretschneider, M.; Kästner, M.; Reithmeier, E. (2009): Measurement and Characterisation of Microstructures made by Cutting ProcessesProceedings of the euspen 9th International Conference, San Sebastian, 02.-05. June 2009, Volume 2, pp. 223 - 226 | File |
  • Bretschneider, M.; Kästner, M.; Reithmeier, E. (2009): Metrology and Charcterisation of Thermally Sprayed CoatingsProceedings of the 12th International Conference on Metrology and Properties of Engineering Surfaces, Rzeszow, Poland, 08.-10. July 2009, pp. 317 - 321 | File |
  • Buse, O.; Reithmeier, E. (2009): Aufbau eines statischen low-cost FourierspektrometersMikrosystemtechnik Kongress 2009 Proceedings, 12. - 14. Oktober, Berlin, 2009 | File |
  • Denkena, B.; Möhring, H.-C.; Rosen, S.; Reithmeier, E.; Kästner, M.; Pahlke, A. (2009): Adaptronische Feinpositionierung - Lösungsansatz zur ProduktivitätssteigerungVDI-Tagung "Automation 2009", 16.-17. Juni 2009, Baden-Baden, VDI Berichte, S. 353 - 356 | File |
  • Gillhaus, R.; Immel, J.; Kästner, M.; Reithmeier, E.; Denkena, B. (2009): Vier-Freiheitsgrad Feinpositioniersystem zur Ausrichtung von präzisionsgeschmiedeten RitzelwellenVDI-Tagung "Automation 2009", 16.-17. Juni 2009, Baden-Baden, VDI Berichte Nr. 2067, S. 335 - 338 | File |
  • Gillhaus, R.; Kästner, M.; Haskamp, K.; Abo-Namous, O.; Reithmeier, E. (2009): Analysis of Unbalances of Crank Shafts using Geometric DataProceedings of the euspen 9th International Conference, San Sebastian, 02.-05. June 2009, Volume 2, S. 287 - 290 | File |
  • Graf, J.; Reithmeier, E. (2009): Combined Control for Computationally Efficient Active Noise Reduction in Aviation HeadsetsProceedings MATHMOD Vienna 09, 11. - 13. February 2009, pp. 411 - 415 | File |
  • Hao, Q.; Karpinska A.; Kaestner, M.; Reithmeier, E. (2009): Precise calculation of wear based on comparison of initial and worn surface topographiesProceedings of the 12th International Conference on Metrology and Properties of Engineering Surfaces, Rzeszow, 2009, pp.329-333 | File |
  • Hao, Q.; Kästner, M.; Reithmeier, E. (2009): Charakterisierung der Si-Partikelhöhen auf einer gelaufenen Alusil-Zylinderlaufbahnoberfläche mittels eines konfokalen WeißlichtmikroskopsDritter Workshop Optische Technologien, 2009, Hannover, pp. 190-196
  • Haskamp, K.; Kästner, M.; Reithmeier, E. (2009): A Virtual Telecentric Fringe Projection SystemProceedings of the Fringe 6th International Workshop on Advanced Optical Metrology, Stuttgart, 14.-16. September 2009, S. 576-579 | File |
  • Kästner, M.; Gillhaus, R.; Reithmeier, E. (2009): Geometry Inspection of Precision-Forged Crank Shafts Based on Optical Multisensor TechniquesCoordinate Metrology Systems Conference (CMSC) 2009 – Louisville, Kentucky, USA | File |
  • Mirzaei, S.; Abo-Namous, O.; Beichert, G.; Fahlbusch, T.; Reithmeier, E. (2009): Developing a new generation of optomechanical derotator for analysis of the dynamic behaviour of rotating componentsProc. SPIE 'Advances in Optomechanics' (Optics and Photonics) 7424
  • Mirzaei, S.; Fahlbusch, T.; Reithmeier, E.; Poll, G. (2009): Optische Schlupfmessung an rotierenden Wälzlagern und deren Auswertung mit digitaler BildverarbeitungstechnikVDI-Tagung: "Gleit- und Wälzlagerung: Gestaltung, Berechnung, Einsatz'", 09-10 Juni 2009, Wiesloch bei Heidelberg, VDI-Berichte Nr. 2069, S. 91-102 | File |
  • Mirzaei, S.; Rahlves, M.; Fahlbusch, T.; Reithmeier, E. (2009): Application of an Optomechanical Image Derotator for Measuring Vibration and Deformation of Rotating ObjectsProceedings Optimess (2009) | File |
  • Pahlke, A.; Rosen S.; Kästner, M.; Möhring, H.-C.; Reithmeier, E.; Denkena, B. (2009): Adaptronic Precision Positioning TechnologyASME IDETC/CIE 2009 Proceedings, August 30 - September 2, 2009, San Diego, California, USA, Paper: DETC2009-86658 | File |
  • Rahlves, M.; Mirzaei, S.; Fahlbusch, T.; Reithmeier, E. (2009): In-plane and out-of-plane deformation and vibration measurement using an optomechanical image derotatorProc. SPIE 'Optical Inspection and Metrology for Non-Optics Industries' (Optics and Photonics) 7432
  • Schultheis, T.; Vynnyk, T.; Fahlbusch, T.; Reithmeier, E. (2009): Enhanced stereo SEM measurement of sub-micrometer structuresProceedings of the 3rd EOS Topical Meeting on Optical Microsystems (OμS'09), Capri, Italy, 27th-30th September 2009, ISBN 978-3-00-024191-8 | File |
  • Abo-Namous, O,; Kästner, M.; Reithmeier, E. (2008): Generierung optisch kooperativer Oberflächen für die StreifenprojektionZweiter Workshop Optische Technologien, S. 175 - 177, Hannover, 17 November 2008 | File |
  • Abo-Namous, O.; Seewig, J.; Kästner, M.; Reithmeier, E. (2008): Fast method to measure optical cooperativity109. Tagung der Deutschen Gesellschaft für angewandte Optik, Esslingen am Neckar, DGaO-Proceedings, ISSN: 1614-8436, 2008 | File |
  • Bretschneider, M.; Püschmann, D.; Fahlbusch, T.; Reithmeier, E. (2008): Chromatische Punktsensoren in der Kontur- und Oberflächenmesstechnik109. Tagung der Deutschen Gesellschaft für angewandte Optik, Esslingen am Neckar, DGaO-Proceedings, ISSN: 1614-8436, 2008 | File |
  • Denkena, B.; Immel, J.; Gillhaus, R.; Seewig, J.; Reithmeier, E. (2008): In-Process Measurement and Positioning of Precision-forged Gear Shafts in 4 DOFConference Proceedings of the euspen International Conference, 18-22.05.2008, Zurich,Volume II, pp. 240-244, 2008 | File |
  • Fahlbusch, T.; Dumke, M.; Overmeyer, L.; Reithmeier, E. (2008): Fertigungsverfahren zur direkten Bauteilintegration polymerer LichtwellenleiterDGAO 2008, Esslingen Juni 2008 | File |
  • Gillhaus, R.; Kästner, M.; Reithmeier, E. (2008): Optische Messsysteme zur Geometrieerfassung präzisionsgeschmiedeter BauteileZweiter Workshop Optische Technologien, S. 164-166, Hannover, 17 November 2008 | File |
  • Gillhaus, R.; Kästner, M.; Seewig, J.; Reithmeier, E. (2008): Sensorintegration zur Feinpositionierung von präzisionsgeschmiedeten BauteilenVDI-Tagung "Sensoren und Messsysteme 2008", 10-12.03.2008, Ludwigsburg, VDI Berichte 2011, S. 841-850, 2008 | File |
  • Gillhaus, R.; Kästner, M.; Seewig, J.; Reithmeier, E. (2008): 3D-Data Aquisition, Processing and Analysis of Gear Shaft Measurements Using Optical SensorsCoordinate Measuring Technique 2008, Bielsko-Biela, Poland, pp. 270-278, 2008 | File |
  • Kästner, M.; Gillhaus, R.; Reithmeier, E. (2008): Optical Measurement Techniques for Precision-forged High-performance Pinion Shafts7th International CTI Symposium: Innovative Automative Transmissions, Volume 2, pp. 693-712, Berlin, 3 December 2008 | File |
  • Mirzaei, S.; Fahlbusch, T.; Reithmeier, E.; Poll, G. (2008): Experimental Slip Measurement of Roller Bearings2nd PhD Conference AI4IA, Hannover, 2008 | File |
  • Rahlves, M.; Fahlbusch, T.; Reithmeier, E. (2008): Bewertungen von Weißlichtinterferometermessungen mit KantenteststrukturErster Workshop Optische Technologien – HOT Template Tagungsbeitrag | File |
  • Reithmeier, E.; Graf, J.; Foudhaili, H. (2008): Combination of non-Adaptive and Adaptive Control Strategies for Active Noise Reduction in Headsets9th International Conference on Motion and Vibration Control, Movic, München, 2008 | File |
  • Schultheis, T.; Fahlbusch, T.; Rahlves, M.; Spani Molella, L.; Reithmeier, E. (2008): Brennweitenvariation fluidischer MikrooptikenZweiter Workshop Optische Technologien, S. 158-160, Hannover, 17 November 2008, ISBN 978-3-941416-17-8 | File |
  • Vynnyk, T.; Seewig, J.; Reithmeier, E. (2008): 3D Surface Measurement by Low Voltage Scanning Electron MicroscopeXII. International Colloquium on Surfaces, Chemnitz, January 28th and 29th 2008 | File |
  • Foudhaili, H.; Reithmeier, E. (2007): Combined Feedback and Adaptive Feedforward Aktive Noise Control13th International Workshop on Dynamics and Control | File |
  • Foudhaili, H.; Reithmeier, E. (2007): Concepts of Active Noise Reduction employed in High Noise Level Aircraft Cockpits47th Workshop of the Int. School of Mathematics Guido Stampaccia, Erice, Italy, 2007 | File |
  • Foudhaili, H.; Wolter, B.; Reithmeier, E.; Peissig, J. (2007): Feedback-Feedforward aktive Lärmkompensation für den KopfhörerFortschritte der Akustik, 33. Jahresgang für Akustik DAGA 2007, Stuttgart, pp. 705-6, 2007 | File |
  • Kästner, M.; Gillhaus, R.; Seewig, J.; Reithmeier, E. (2007): Optische Multisensortechnik zur Geometrieerfassung präzisionsgeschmiedeter BauteileVDI-Tagung „Optische Messtechnik technischer Oberflächen in der Praxis“, 09.-10.10.2007, Hannover, VDI-Berichte 1996, S. 89-100, 2007 | File |
  • Kästner, M.; Seewig, J.; Frankowski, G.; Reithmeier, E. (2007): Optical 3D Digitization and Coordinate Measurement of Parts by Means of DLP Based Projected Fringe Measuring TechnologyCoordinate Metrology Systems Conference 2007 – Reno, USA | File |
  • Langholz, N.; Seewig, J.; Reithmeier, E. (2007): Robust surface fitting based on a priori knowledge about the measurement process11th Int. Conference on Metroology and Properties of Engineering surfaces, Huddersfield, 2007 | File |
  • Mirzaei, S.; Kasyanenko, N.; Beichert, G.; Reithmeier, E. (2007): Entwicklung eines neuartigen optomechanischen BildderotatorsDGaO-Proceedings www.dgao-proceedings.de oder 108 Jahrestagung der Deutschen Gesellschaft für angewandte Optik, (DGaO), 29.5-2.6.2007, Heringdorf, 2007 | File |
  • Mirzaei, S.; Reithmeier, E. (2007): Digital Image Processing for the Determination of Dynamic Effects in Roller Bearings1.st PhD Conference on AI4IA, Ostrava, 2007 | File |
  • Püschmann, D.; Seewig, J.; Volk, R.; Reithmeier,E. (2007): Maßgeschneiderte Ausrichttoleranzen geben Sicherheit und sparen Zeit – Theorie und PraxisVDI - Fachtagung: Optische Messung technischer Oberflächen, 2007 | File |
  • Rahlves, M.; Seifert, M.; Fahlbusch, T.; Frühauf, J.; Reithmeier, E. (2007): Bewertung von Weißlichtinterferometermessungen mit einer Kantenteststruktur108 Jahrestagung der Deutschen Gesellschaft für angewandte Optik (DGaO) | File |
  • Scholz, T.; Seewig, J.; Reithmeier, E.; Helferich, G. (2007): Explosive embossing of holographic structures: Computational simulation of procedural influences to the reconstructed hologramExperimental Analysis of Nano and Engineering Materials and Structures, Proceedings of th 13th International Conference on Experimental Mechanics (ICEM13), Alexandroupolis, Greece, July 1-6, 2007, ISBN: 978-1-4020-6238-4 | File |
  • Scholz, T.; Seewig, J.; Reithmeier, E.; Helferich, G. (2007): Explosive embossing of holographic structuresSPIE 2007- Optical Metrology, München, Deutschland, 20-22. Juni 2007 | File |
  • Wolter, B.; Foudhaili, H.; Peissig, J.; Reithmeier, E. (2007): Combined Feedback and Adaptive Feedforward Aktive Noise Control in HeadsetsInternoise - the 36th Int. Congress and Exhibition on Noise Control Engineering, Istanbul / 2007 | File |
  • Buse, O.; Beichert, G.; Kraft, A.; Reithmeier, E. (2006): Miniaturisiertes low-cost Fourierspektrometer für ein mikrooptisches BlutanalysesystemDGaO-Proceedings 2006 | File |
  • Foudhaili, H.; Reithmeier, E. (2006): Simulation of a 2-Channel Broadband Feedforward Active Control of Noise with Arbitrary Direction13th International Workshop on Dynamics & Control | File |
  • Kästner, M.; Böttner, T.; Seewig, J.; Reithmeier, E. (2006): Messunsicherheitsbetrachtungen bei der StreifenprojektionstechnikVDI-Tagung "Messunsicherheit praxisgerecht bestimmen", 11/2006, S. 69-78 | File |
  • Kästner, M.; Meeß, K.; Seewig, J.; Reithmeier, (2006): Vergleiche der Streifenproduktionstechnik mit taktilen Methoden - Geometrieprüfung von ZahnrädernDimensionale - Optische Messtechnik, S. 18 - 19
  • Püschmann, D.; Volk, R.; Seewig, J.; Reithmeier, E. (2006): Maßgeschneiderte Ausrichttoleranzen geben Sicherheit und spart Zeit - Theorie und PraxisVDI-Berichte Nr. 1945 2006, Seite 131 - 142 | File |
  • Rahlves, M.; Gräper, A.; Kraft, A.; Reithmeier, E. (2006): Entwicklung multifunktionaler Kalibriernormale für bildverarbeitende 3D-Mikroskope107. Jahrestagung der Deutschen Gesellschaft für angewandte Optik (DGaO) | File |
  • Foudhaili, H.; Reithmeier, E. (2005): Simulation of a 2-Channel Broadband Feedforward Active Control of Noise with Arbitrary Direction13th International Workshop on Dynamics & Control, Wiesensteig, Germany, May 22 - 26, 2005 | File |
  • Kästner, M.; Krause, C.; Seewig, J.; Reithmeier, E.; Bach, Fr.-W. (2005): Optische Verzugsmessung bei der integrierten Wärmebehandlung präzisionsgeschmiedeter BauteileOWT 05+WTK, 29.-30.09.2005, Chemnitz, Tagungsband, pp.358-365 | File |
  • Kästner, M.; Meeß, K.; Seewig, J.; Reithmeier, E. (2005): Optische Geometrieerfassung von ZahnrädernVerzahnungsmesstechnik, 14.-15.06.2005, Stuttgart, VDI-Berichte 1880, 155-163 | File |
  • Kästner, M.; Seewig, J.; Reithmeier, E. (2005): Calibration of an Optical 3D Triangulation Sensor for the Evaluation of Precision-Forged GearwheelsISMTII, 06.-08.09.2005, Huddersfield, Journal of Physics: Conference Series | File |
  • Langholz, N.; Seewig, J.; Reithmeier, E. (2005): Reconstruction of Bad Values in Optical Measured Surface Data10th International Conference Metrology and Properties of Engineering Surfaces | File |
  • Weidner, A.; Seewig, J.; Reithmeier, E. (2005): Structure Oriented 3D Roughness Evaluation with Optical Profilers10th International Conference Metrology and Properties of Engineering Surfaces | File |
  • Leitmann, G.; Reithmeier, E. (2002): Analysis of a Robust Vibration Control Based on the Derivative of the StateProceedings of the 10th Japanese-German Seminar on Nonlinear Problems in Dynamical Systems. Noto, Japan, 30.September - 3.Oktober, 2002, S. 95 - 104
  • Reithmeier, E.; Leitmann, G. (2002): Active Suspension Control Based on Readily Determined VariablesProceedings of the 3rd World Conference on Structural Control. Como, Italy, 7. - 12. April, 2002
  • Stanchev, S.; Reithmeier, E.; Christov, N. (2002): Pseudo Indirect Stabilizing Adaptive Controller Design for a Linearized Model of an Inverted Pendulum Around Vertical PositionWorkshop on Automatic Control of the Bulgarian Academy of Science, Sofia, November 2002, S. 145 - 148 | File |
  • Reithmeier, E.; Leitmann, G. (2001): Robust Controller Design via Readily Determined VariablesProceedings of the 10th International Symposium on Dynamic Games and Applications. Cargese, Corsica, 17.-20. July, 2001
  • Reithmeier, E.; Leitmann, G. (2001): Vibration Control of Dynamical Systems Employing Active Suspension ElementsProceedings of the 6th European Control Conference. Porto, Portugal, 4.-7. September 2001, S. 2627-2631
  • Reithmeier, E. (2000): Robust Control of a Steer-by-Wire System in CarsProceedings of the 9th German-Japanese Seminar on Nonlinear Problems in Dynamical Systems, Straelen, Germany, 20.-23. August 2000, S.13-17 | File |
  • Reithmeier, E. (2000): Robust Real- and Discrete-Time Control of a Steer-by-Wire System in CarsProceedings of the 11th Workshop on Dynamics & Control, Rio de Janero, Brazil, 9.-11. October 2000, S.79-85 | File |
  • Reithmeier, E.; Leitmann, G. (1999): Complex Dynamical Systems With Incomplete Information. Proceedings Volume of the 10th Workshop on Dynamics & Control Lambrecht, Shaker Verlag, 19.-22. August 1998, Aachen 1999
  • Reithmeier, E.; Küçükay, F.; Leitmann, G. (1998): Active Noise Control in Automatic Transmission Automobiles to Improve the Driveability. Proceedings of the 10th Workshop on Dynamics & Control, Lambrecht, Germany, 19.–22. August 1998, S.130-139 | File |
  • Reithmeier, E.; Küçükay, F.; Leitmann, G. (1998): ANC in Automobiles. Proceedings of the 8th Japanese-German Seminar on Nonlinear Problems in Dynamical Systems, Kobe, Japan, 5.-8. October 1998, S.81-87 | File |

Journale

  • Hedrich, K.; Hinz, L.; Reithmeier, E. (2023): Damage Segmentation on High-Resolution Coating Images Using a Novel Two-Stage Network PipelineMDPI Aerospace Special Issue Recent Advances in Technologies for Aerospace Maintenance
    DOI: 10.3390/aerospace10030245
  • P. Kern, L. Hinz, M. Kästner, E. Reithmeier, S. Blankemeyer, C.-V. Ince, A. Raatz, B.-A. Behrens, K. Brunotte, J. Uhe (2023): Prozessoptimierung mittels Inline-GeometriemessungWT WERKSTATTSTECHNIK BD. 113 (2023) NR. 10
    DOI: https://doi.org/10.37544/1436-4980-2023-10-35
  • Siemens, S.; Kästner, M.; Reithmeier, E. (2023): RGB-D microtopography: A comprehensive dataset for surface analysis and characterization techniquesData in Brief; Elsevier
    DOI: https://doi.org/10.1016/j.dib.2023.109094
  • Bossemeyer, H.; Ahlborn, P.; Kästner, M.; Reithmeier, E (2022): Calibration of focus-adjustable cameras for triangulation sensors by model-based camera parameter estimationtm - Technisches Messen, vol. 89, no. 6, 2022, pp. 455-462
    DOI: https://doi.org/10.1515/teme-2022-0023
    ISSN: 2196-7113
  • Melchert, N.; Hinz, L.; Schindlbeck, C.; Reithmeier, E. (2022): Increasing optical pose estimation accuracy via freeform design and its application to hand-eye calibrationOptics Express
    DOI: 10.1364/OE.455188
  • Middendorf, P.; Blümel, R.; Hinz, L.; Raatz, A.; Kästner, M.; Reithmeier, E. (2022): Pose Estimation and Damage Characterization of Turbine Blades during Inspection Cycles and component-protective Disassembly ProcessesSensors (Basel)
    DOI: 10.3390/s22145191
  • Middendorf, P; Rothgänger, M.; Peddinghaus, J.; Brunotte, K.; Uhe, J.; Behrens, B.A.; Quentin, L.; Kästner, M.; Reithmeier, E. (2022): In Situ Wear Measurement of Hot Forging Dies Using Robot Aided Endoscopic Fringe ProjectionKey Engineering Materials
    DOI: 10.4028/p-k81788
  • Siemens, S.; Kästner, M.; Reithmeier, E. (2022): Texture Direction Analysis of Micro-topographies Using Fractal GeometrySurface Topography: Metrology and Properties, IOPScience
    DOI: 10.1088/2051-672X/ac9ad0
  • Hang Luo; C. Pape; E. Reithmeier (2021): Robust RGBD Visual Odometry Using Windowed Direct Bundle Adjustment and Slanted Support PlaneIEEE Robotics and Automation Letters
    DOI: 10.1109/LRA.2021.3126347
  • L. Quentin, R. Beermann, C. Reinke, P. Kern, M. Kästner und E. Reithmeier (2021): Adapted Fringe Projection Sequences for Changing Illumination Conditions on the Example of Measuring a Wrought-Hot Object Influenced by Forced CoolingSensors 21 (5)
    DOI: https://doi.org/10.3390/s21051599
  • Lennart Hinz, Sebastian Metzner, Philipp Müller, Robert Schulte, Hans-Bernward Besserer, Steffen Wackenrohr, Christopher Sauer, Markus Kästner, Tino Hausotte, Sven Hübner, Florian Nürnberger, Benjamin Schleich, Bernd-Arno Behrens, Sandro Wartzack, Marion Merklein, Eduard Reithmeier (2021): Fringe Projection Profilometry in Production Metrology: A Multi-Scale Comparison in Sheet-Bulk Metal FormingMDPI Sensors, Basel | File |
    DOI: 10.3390/s21072389
  • Nils Melchert, Maximilian K.-B. Weiss, Tim Betker, Wojciech Frackowiak, Renè Gansel, Lars Keunecke, Eduard Reithmeier, Hans Jürgen Maier, Markus Kästner, and David Zaremba (2021): Combination of optical metrology and non-destructive testing technology for the regeneration of aero engine componentsTechnisches Messen
    DOI: 10.1515/teme-2020-0093
  • Hinz L.; Kästner, M.; Reithmeier, E. (2020): A 3D Measuring Endoscope for use in Sheet-Bulk Metal Forming: Design, Algorithms, Applications and ResultsSpringer Nature Switzerland AG
    DOI: 10.1007/978-3-030-61902-2_11
    ISBN: 978-3-030-61901-5
  • Höber, S.; Pape, C.; Reithmeier, E. (2020): Model decomposition via optical delay estimation using the camera-tracking in an active noise control system for creation of a movable quiet zoneNoise Control Engineering Journal (accepted)
  • Luo, H.; Pape, C.; Reithmeier, E. (2020): Scale-Aware Multi-View Reconstruction Using an Active Triple-Camera SystemSensors
    DOI: https://doi.org/10.3390/s20236726
  • Quentin, L., Beermann, R., Kästner, M., & Reithmeier, E. (2020): Development of a reconstruction quality metric for optical three-dimensional measurement systems in use for hot-state measurement objectOptical Engineering | File |
    DOI: https://doi.org/10.1117/1.OE.59.6.064103
  • Quentin, L., Reinke, C., Beermann, R., Kästner, M., & Reithmeier, E. (2020): Design, Setup, and Evaluation of a Compensation System for the Light Deflection Effect Occurring When Measuring Wrought-Hot Objects Using Optical Triangulation MethodsMetals | File |
    DOI: https://doi.org/10.3390/met10070908
  • Rüdiger Beermann, Lorenz Quentin, Markus Kästner, Eduard Reithmeier (2020): Calibration routine for a telecentric stereo vision system considering affine mirror ambiguityOpt. Eng. 59(5) 054104 (26 May 2020)
    DOI: 10.1117/1.OE.59.5.054104
  • Timm Coors, Florian Pape, Jens Kruse, Thoms Blohm, Rüdiger Beermann, Lorenz Quentin, Sebastian Herbst, Jan Langner, Malte Stonis, Markus Kästner, Eduard Reithmeier, Florian Nürnberger, Gerhard Poll (2020): Simulation assisted process chain design for the manufacturing of bulk hybrid shafts with tailored propertiesInt J Adv Manuf Technol 108
    DOI: 10.1007/s00170-020-05532-2
  • Töberg, S.; Reithmeier, E. (2020): Quantitative 3D Reconstruction from Scanning Electron Microscope Images Based on Affine Camera ModelsMDPI Sensors 20, 3598.
    DOI: 10.3390/s20123598
  • Altmann, B.; Betker, T.; Pape, C.; Reithmeier, E. (2019): Alignment strategy for an optomechanical image derotator using a laser Doppler vibrometerApplied Optics
    DOI: 10.1364/AO.58.006555
  • Hinz, Lennart; Kästner, Markus; Reithmeier, Eduard (2019): Metal Forming Tool Monitoring Based on a 3D Measuring Endoscope Using CAD Assisted RegistrationMDPI Sensors, Basel | File |
    DOI: 10.3390/s19092084
  • Quentin, l.; Beermann, R.; Kästner, M.; Reithmeier, E. (2019): Detection of material zones on the surface of a steel–aluminum hybrid component using reflection models and a monochromatic fringe projection profilometry system Applied Optics
    DOI: 10.1364/AO.58.000772
  • Schindlbeck C.; Pape, Ch.; Reithmeier, E. (2019): Process-Integrated State Estimation of Optical Systems with Macro-micro Manipulators based on Wavefront FilteringVol. 4, No. 4, pp. 4078-4085, IEEE Robotics and Automation Letters | File |
    DOI: 10.1109/LRA.2019.2930423
  • Yin, Y.; Altmann, B.; Pape, C.; Reithmeier, E. (2019): Machine-vision-guided rotation axis alignment for an optomechanical derotatorOptics and Lasers in Engineering, Volume 121, Pages 456-463
    DOI: https://doi.org/10.1016/j.optlaseng.2019.05.001
  • Altmann, B.; Pape, Ch.; Reithmeier, E. (2018): Image-based discrete-time optimal feedback control for an optomechanical derotatorIFAC PapersOnLine 51-32 (2018) 292–297
  • Beermann, R.; Quentin, L.; Reithmeier, E.; Kästner, M. (2018): Fringe projection system for high-temperature workpieces–design, calibration, and measurementAppl. Opt. 57 (15), pp. 4075-4089 (2018)
    DOI: 10.1364/AO.57.004075
  • Beermann, R.; Quentin, L.; Stein, G.; Reithmeier, E.; Kästner, M. (2018): Full simulation model for laser triangulation measurement in an inhomogeneous refractive index fieldOptical Engineering 57 (11), pp. (114107-)1 -(114107-)13
    DOI: 10.1117/1.OE.57.11.114107
  • Li, Y.; Kästner, M.; Reithmeier, E. (2018): Triangulation-based edge measurement using polyview opticsOptics and Laser in Engineering Vol. 103, pp. 71-76
    DOI: https://doi.org/10.1016/j.optlaseng.2017.11.015
  • Loftfield, N.; Kästner, M; Reithmeier, E. (2018): 3-D reconstruction of the porous microstructure of Al2O3-coatings based on sequentially revealed surface dataMeasurement Science and Technology
    DOI: https://doi.org/10.1088/1361-6501/aabe3e
  • Schindlbeck C.; Pape, Ch.; Reithmeier, E. (2018): Multi-DOF compensation of piezoelectric actuators with recursive databases Vol. 66, Issue 8, pp. 656-664, at - Automatisierungstechnik | File |
    DOI: 10.1515/auto-2017-0136
    ISBN: 0178-2312
  • Schindlbeck, C.; Pape, Ch.; Reithmeier, E. (2018): Predictor-corrector framework for the sequential assembly of optical systems based on wavefront sensingVol. 26, Issue 8, pp. 10669-10681, Optics Express | File |
    DOI: 10.1364/OE.26.010669
  • Beermann, R.; Quentin, L.; Pösch, A.; Reithmeier E.; Kästner, M. (2017): Background oriented schlieren measurement of the refractive index field of air induced by a hot, cylindrical measurement objectAppl. Opt. 56 (14), pp. 4168-4179 (2017)
    DOI: 10.1364/AO.56.004168
  • Kröger, N.; Schlobohm, J.; Pösch, A.; Reithmeier, E. (2017): Using Refraction in Thick Glass Plates for Optical Path Length Modulation in Low Coherence InterferometryApplied Optics Vol. 56, Issue 25, pp. 7299-7304
    DOI: 10.1364/AO.56.007299
  • Li, Y.; Kästner, M.; Reithmeier, E. (2017): Optimization of the GPU-based data evaluation for the low coherence interferometryTechnisches Messen
    DOI: https://doi.org/10.1515/teme-2017-0091
  • Li, Y.; Kästner, M.; Reithmeier, E. (2017): Vibration-insensitive Low Coherence Interferometer (LCI) for the Measurement of Technical SurfacesMeasurement, Elsevier, 2017, ISSN: 0263-2241
    DOI: 10.1016/j.measurement.2017.03.010
  • Steffen Matthias, Jochen Schlobohm, Markus Kästner, Eduard Reithmeier (2017): Fringe projection profilometry using rigid and flexible endoscopesTechnisches Messen | File |
    DOI: 10.1515/teme-2016-0054
    ISBN: 0171-8096
  • Jochen Schlobohm *, Andreas Pösch and Eduard Reithmeier (2016): A Raspberry Pi Based Portable Endoscopic 3D Measurement SystemElectronics | File |
    DOI: doi:10.3390/electronics5030043
  • Jochen Schlobohm *, Yinan Li, Andreas Pösch, Markus Kästner, Eduard Reithmeier (2016): Multiscale measurement of air foils with data fusion of three optical inspection systemsCIRPJ
    DOI: 10.1016/j.cirpj.2016.07.006
  • Jochen Schlobohm, Andreas Pösch, Eduard Reithmeier, Bodo Rosenhahn (2016): Improving contour based pose estimation for fast 3D measurement of free form objectsMeasurement 92 (2016) 79-82
    DOI: 10.1016/j.measurement.2016.05.093
  • Jochen Schlobohm, Oliver Bruchwald, Wojciech Frackowiak, Yinan Li, Markus Kästner, Andreas Pösch, Wilfried Reimche, Eduard Reithmeier and Hans Jürgen Maier, (2016): Turbine blade wear and damage - An overview of advanced characterization techniquesMaterials testing 58 (2016) 5
    DOI: 10.3139/120.110872
  • Matthias, S.; Kästner, M.; Reithmeier, E. (2016): Modeling of imaging fiber bundles and adapted signal processing for fringe projectionAdvanced Optical Technologies
    DOI: 10.1515/aot-2016-0050
  • Matthias, S.; Loderer, A.; Koch, S.; Gröne, M.; Kästner, M.; Hübner, S.; Krimm, R.; Reithmeier, E.; Hausotte, T.; Behrens, B. (2016): Metrological solutions for an adapted inspection of parts and tools of a sheet-bulk metal forming processVol. 10 (1), Production Engineering
    DOI: 10.1007/s11740-015-0647-2
  • Müller, T., Jordan, M., Schneider, T., Pösch, A., Reithmeier, E. (2016): Measurement of steep edges and undercuts in confocal microscopyMicron, 84, 79-95
    DOI: doi:10.1016/j.micron.2016.03.001
  • Pösch, Andreas; Schlobohm, Jochen; Matthias, Steffen; Reithmeier, Eduard (2016): Rigid and flexible endoscopes for three dimensional measurement of inside machine parts using fringe projectionOptics and Lasers in Engineering
    DOI: 10.1016/j.optlaseng.2016.05.023
  • Wiederkehr (geb. Kersting), P.; Gröbel, D.; Merklein, M.; Sieczkarek, P.; Tekkaya, A.; Krebs, E.; Freiburg, D.; Biermann, D.; Weikert, T.; Wartzack, S.; Stangier, D.; Tillmann, W.; Matthias, S.; Reithmeier, E.; Löffler, M.; Beyer, F.; Willner, K. (2016): Experimental and numcerial analysis of tribological effective surfaces for forming tools in Sheet-Bulk Metal FormingProduction Engineering
  • Zou, Y.; Kästner, M.; Reithmeier, E. (2016): Analysis of the multiscale measurement of porous microstructures based on 3D optical microscropesMeasurement
    DOI: 10.1016/j.measurement.2016.01.020
  • Zou, Y.; Kästner, M.; Reithmeier, E. (2016): Dimensional fractal analysis of thermal spray coatings based on optical roughness measurementTechnisches Messen
    DOI: DOI 10.1515/teme-2016-0006
  • Zou, Y.; Li, Y.; Kästner, M.; Reithmeier, E. (2016): Low coherence interferometry based roughness measurement on turbine blade surfaces using wavelet analysisOptics and Lasers in Engineerung
    DOI: 10.1016/j.optlaseng.2016.02.011
  • Li, Y., Kästner, M., Reithmeier, E. (2015): High-precision surface measurement with an automated multiangle low coherence interferometerApplied Optics, Vol. 54 Issue 6, pp.1232-1240 (2015)
    DOI: 10.1364/AO.54.001232
  • Loderer, A., Timmermann, M., Matthias, S., Kästner, M., Schneider, T., Hausotte, T., Reithmeier, E. (2015): Measuring systems for sheet-bulk metal formingKey Engineering Materials
  • Matthias, S.; Kästner, M.; Reithmeier, E. (2015): Single image geometry inspection using inverse endoscopic fringe projectionACTA IMEKO
  • Mueller, T., Poesch, A., Reithmeier, E. (2015): Measurement Uncertainty of Microscopic Laser Triangulation on Technical SurfacesMicroscopy and Microanalysis
    DOI: 10.1017/S1431927615015330
  • Mueller, T., Reithmeier, E. (2015): Image segmentation for laser triangulation based on Chan–Vese modelMeasurement, 63, 100–109
  • Müller, T., Pösch, A., Reithmeier, E. (2015): Ein vereinfachter optischer Aufbau für den Autofokus eines Mikroskops mittels einer verstellbaren Linsetm - Technisches Messen. Band 82, Heft 3
    DOI: 10.1515/teme-2014-0035
  • Zou, Y.; Kästner, M.; Reithmeier, E. (2015): A method for multi-resolution characterization on porous surfaces by using a laser confocal scanning microscopeOptics and Lasers in Engineering | File |
    DOI: 10.1016/j.optlaseng.2015.05.005
  • Rohloff, B., Pape, C., Reithmeier, E. (2014): Automated calibration of an optomechanical derotator using 6-axes parallel kinematics and industrial image processing algorithmsOptical Engineering 53(10), 104101 | File |
    DOI: 10.1117/1.OE.53.10.104101
  • Krauß, M., Kästner, M., Reithmeier, E. (2013): Multi-Scale Inspection of Worn Surfaces for Product RegenerationJournal of the CMSC 1/2013
  • Mueller T., Reithmeier E. (2013): Optical Inspection of Microstructured Surfaces under Industrial ConditionsInstitute of Measurement and Automatic Control, Scientific Reports 2011-2013, ISBN 978-3-944586-32-8
  • Ohrt, C.; Kästner, M.; Reithmeier, E. (2013): High resolution measurements of filigree, inner geometries with endoscopic micro fringe projectionProceedings of SPIE, Optical Measurement Systems for Industrial Inspection VIII Volume 8788, S. 878817-1 doi: 10.1117/12.2020440
  • Pösch. A.; Vynnyk. T.; Reithmeier, E. (2013): Fast Detection of Geometry Defects on Free Form Surfaces Using Inverse Fringe ProjectionJournal of the CMSC, Vol. 8, No. 1
  • Scheuer,R., Reithmeier, E., Windeler,N. B. (2013): Stitching and Memory-Optimized Processing of Three-Dimensional Riblet Surface Datasets for Oil Channel TestsInternational Journal of Modeling and Optimization Vol. 3, No. 5, October 2013, p.453-457 | File |
  • Haskamp, K.; Kästner, M.; Ohrt, C.; Reithmeier, E. (2012): Estimation of measurement uncertanties using virtual fringe projection techniqueApplied Optics, Vol. 51, No. 9
  • Haskamp, K.; Rahlves, M.; Kästner, M.; Reithmeier, E. (2012): Numerical Simulation of a Shadow Projection System by Interpolating Diffraction ImagesTM Technisches Messen Heft 2(2012), S.107 - 114, DOI 10.1524/teme.2012.0166, http://www.technisches-messen.de
  • Lietmeyer, C.; Seume, J. R.; Scheuer, R.; Vynnyk, T.; Reithmeier, E., Krawczyk, T.; Denkena, B.; Wojakowski, B.; Kling, R.; Overmeyer, L. (2012): Recent Advances in Manufacturing of Riblets on Compressor Blades and Their Aerodynamic ImpactJOURNAL OF TURBOMACHINERY Article Number: TURBO-12-1136 | File |
  • Ohrt, C.; Hartmann, W.; Weickmann, J.; Kästner, M.; Weckenmann, A.; Hausotte, T.; Reithmeier, E.; (2012): Holistic measurement in the sheet-bulk metal forming process with fringe projectionKey Engineering Materials Vols. 504-506(2012) pp 1005-1010
  • Ohrt, C.; Kästner, M.; Reithmeier, E.; Weckenmann, A.; Weickmann, J. (2012): Optische Inspektion von Blechmassivumformteilen und -werkzeugen mit feinen NebenformelementenTM Technisches Messen Heft 2(2012), S.95 - 102, DOI 10.1524/teme.2012.0166, http://www.technisches-messen.de
  • Ohrt, C.; Matthias, S.; Kästner, M.; Reithmeier E. (2012): Fast Endoscopic Geometry Measurement with Fiber-Based Fringe Projection for Inner GeometriesJournal of the CMSC Vol.7 No. 2 Autumn 2012
  • Pape, C.; Reithmeier, E. (2012): Modellierung einer Makro-Mikro-KinematikJahresbericht des RRZN-Clustersystems 2011, S. 104-105
  • Schultheis, T.; Hoheisel, D.; Xiao, W.; Spani Molella, L.; Reithmeier, E.; Rissing, L.; Hardt, S.: (2012): Performance of an adaptive liquid microlens controlled by a micro coil actuatorJournal of Microfluidics and Nanofluidics (doi:10.1007/s10404-012-0961-3), Springer
  • Weckenmann, A.; Reithmeier, E.; Merklein, M.; Wartzack, S.; Behrens, B.; Akkasoglu, G.; Ohrt, C.; Schneider, T.; Salfeld, V.; Breitsprecher, T.; Plugge, B. (2012): Methodengestützte Referenzvorgehensweise für neue Umformverfahren. In: Zeitschrift für wirtschaftlichen FabrikbetriebZeitschrift für wirtschaftlichen Fabrikbetrieb
  • Gillhaus, R.; Gümmer, O.; Kästner, M.; Reithmeier, E.; Denkena, B. (2011): Aktive Bauteilausrichtung, Optisches Inline-Messsystem optimiert KurbelwellenbearbeitungQZ - Qualität und Zuverlässigkeit, 1/2011, Jahrgang 56, S. 42 - 45 | File |
  • Haskamp, K.; Kästner, M.; Gillhaus, R.; Reithmeier, E. (2011): Messunsicherheitsanalyse mittels virtueller Streifenprojektionstechnik auf Grundlage von PolygonmodellenTM Technisches Messen Heft 02(2011), S. 60 - 68, DOI 10.1524/teme.2011.0084, http://www.technisches-messen.de | File |
  • Haskamp, K.; Kästner, M.; Reithmeier, E. (2011): Gegen die zitternde Hand: Multisensor-Assistenzsystem optimiert Messprozesse virtuellQZ - Qualität und Zuverlässigkeit, 03/2011, S. 56-57 | File |
  • Hübsch, C.; Erne, M.; Möhwald, K.; Bach, Fr.-W.; Bretschneider, M.; Kästner, M.; Reithmeier, E. (2011): Optische Oberflächencharakterisierung von plasmagespritzten stochastischen StrukturenMaterialwissenschaft und Werkstofftechnik, Article first published online: 9 JUN 2011, DOI: 10.1002/mawe.201100717 | File |
  • Krauß M., Ohrt C., Kästner M. Reithmeier E. (2011): 3D Messtechnik für Inspektion und In-Situ ÜberwachungIngenieurspeigel Ausgabe 3 2011 S.71-72
  • Rodman, D.; Krause, C.; Nürnberger, F.; Bach, Fr.-W.; Haskamp, K.; Kästner, M.; Reithmeier, E. (2011): Induction hardening of spur gearwheels made from 42CrMo4 hardening and tempering steel by employing spray coolingsteel research international; Volume 82, No. 4, S.329-336, DOI: 10.1002/srin.201000218 | File |
  • Vynnyk, Scheuer, Reithmeier (2011): Kleine Rillen, große WirkungUnimagazin 01/02 2011 Leibniz Universität Hannover, ISSN 1616-4075
  • Weckenmann A., Behrens B., Reithmeier E., Akkasoglu G., Vucetic M., Ohrt C., Cahyono T., Hübner S., Kästner M. (2011): Appliance of the maturity method in the develpoment of endoscopic geometry inspection for sheet bulk metal forming tools International Journal of Total Quality Management & Exellence No.1 Vol. 39 2011 ISSN 2217-5768 S. 11-16
  • Hao, Q.; Bianchi, D.; Kästner, M.; Reithmeier, E. (2010): Feature based characterization of worn surfaces for a sliding testTribology International 43 (2010), 1186–1192 | File |
  • Haskamp, K.; Kästner, M.; Reithmeier, E. (2010): Modellbasierte Kalibrierung von Streifenprojektionssystemen mit telezentrischer KameraTM Technisches Messen Heft 11(2010), S.590 - 600, DOI 10.1524/teme.0032, http://www.technisches-messen.de | File |
  • Leis, A.; Kästner, M.; Reithmeier, E. (2010): Detektion von Verschleißbereichen mittels ortsaufgelöster 3D-Rauheitsanalysetm - Technisches Messen 11/2010, S. 601-606 | File |
  • Ohrt, C.; Kästner M.; Reithmeier, E. (2010): Endoskopische Messverfahren in der MikrotechnikIndustriemanagement 6/2010 Mikro- und Nanotechnologien, S. 29-30 | File |
  • Pahlke, A.; Kästner, M.; Reithmeier, E.; Rosen, S.; Denkena, B.; Schräder, P.; Schroth, M.; Schiedewitz, M. (2010): Feinpositioniersystem für die automatisierte FertigungMM-Maschinenmarkt, Ausgabe 5/2010, S. 56 - 58 | File |
  • Reithmeier, E.; Vynnyk, T.; Schultheis, T. (2010): 3D-measurement Using a Scanning Electron MicroscopeApplied Mathematics and Computation (doi:10.1016/j.amc.2010.01.107) | File |
  • Vynnyk, T.; Schultheis, T.; Fahlbusch, T.; Reithmeier, E. (2010): 3D-measurement with the stereo scanning electron microscope on sub-micrometer structures (doi: 10.2971/jeos.2010.10038s)JEOS:RP, p. 208-210 | File |
  • Behrens, B.-A.; Odening, D.; Gillhaus, R.; Kästner, M.; Reithmeier, E. (2009): Fertigungsintegrierte Messeinrichtung zur Lageerfassung präzisionsgeschmiedeter RitzelwellenUTF science 2009, Ausgabe 3/2009 | File |
  • Behrens, B. A.; Odening, D.; Gillhaus, R.; Kästner, M.; Reithmeier, E. (2009): Feiner Beitrag zur EffizienzUmformtechnik, 04/2009, S. 28-29 | File |
  • Gretzki, T.; Krause, C.; Frolov, I.; Hassel, T.; Nicolaus, M.; Bach, F.-W.; Kästner, M.; Abo-Namous, O.; Reithmeier, E. (2009): Manufacturing Surface Hardened Components of 42CrMo4 by means of Water-Air Spray Coolingsteel research international, Volume 80, December 2009, pp. 906 - 915 | File |
  • Kästner, M.; Gillhaus, R.; Reithmeier, E. (2009): Geometry Inspection of Precision-Forged Crank Shafts Based on Optical Multisensor TechniquesThe Journal of the CMSC, pp. 27-32, 2009. | File |
  • Mirzaei, S.; Rahlves, M.; Fahlbusch, T.; Reithmeier, E. (2009): Drehend Messen: Vorteile des Derotators bei der SchwingungsanalyseMessTec & Automation 6/2009 | File |
  • Pahlke, A.; Gillhaus, R.; Schroth, M.; Kästner, M.; Reithmeier, E. (2009): Mit scharfem Blick. Konoskopische Lasersensoren erfassen komplexe BauteileQZ - Qualität und Zuverlässigkeit, 6/2009, Jahrgang 54, S. 43 - 45 | File |
  • Pelshenke, C.; Denkena, B.; Bockhorst, J.; Reithmeier, E.; Fahlbusch, T.; Rahlves, M. (2009): Schnittverlauf beim Trennschleifen von Natursteinen. (Teil 1 - 3)dihw III - IV | File |
  • Denkena B.; Knoll, G.; Bach, F.; Reithmeier, E.; Kästner, J.; Brandt, S.; Drößler, B.; Bretschneider, M. (2008): Mikrostrukturierung funktionaler Oberflächen - Auslegung, Fertigung und Charakterisierung von Mikrostrukturen zur tribologischen Funktionalisierung von Oberflächenwt Werkstattstechnik online Jahrgang 98 (2008) H. 6, S. 486 - 494 | File |
  • Reithmeier, E.; Mirzaei, S.; Kasyanenko, N. (2008): Optical Vibration and Deviation Measurement of Rotating Machine PartsOptoelectronics Letters, Vol. 4, No. 1, Januar 2008 | File |
  • Gräper, A.; Kraft, A.; Seewig, J.; Reithmeier, E. (2006): Entwicklung multifunktionaler Kalibriernormale für die optische 3D-MikroskopieTechnisches Messen, Vol. 73, 1/2006, S.19-25 | File |
  • Haase, R.; Kästner, M.; Immel, J.; Seewig, J.; Reithmeier, E.; Denkena, B. (2006): Kürzere Prozessketten durch Feinpositioniersysteme - Ein innovativer Lösungsansatz zur Substitution des Auswuchtens von KurbelwellenWerkstattstechnik online, Jahrgang 96 (2006) H.5, S. 252 - 256 | File |
  • Kästner, M.; Seewig, J.; Reithmeier, E. (2006): Mess- und Prüftechnik beim PräzisionsschmiedenUmformtechnik 1/2006, S. 48-50 | File |
  • Kästner, M.; Seewig, J.; Reithmeier, E.; Bernard, M.; Scheer, C.; Reimche, W.; Bach, F. (2006): Measurement techniques for precision forgingWIRE 2/2006/April | File |
  • Meeß, K.; Kästner, M.; Seewig, J.; IMR - Hannover (2006): Verringerung und Abschätzung der Messunsicherheit bei der optischen Verzahnungsmessung mit StreifenprojektionTechnisches Messen, Vol. 73, 11/2006, S. 603-610 | File |
  • Reithmeier, E.; Frühauf, J.; Rahlves, M.; Kraft, A.; Seifert, M. (2006): Heißprägen multifunktionaler Kalibriernormale für die optische 3D MikroskopieVDI-Bericht 1950, VDI Verlag, S. 35- 44 | File |
  • Haase, R.; Seewig, J.; Reithmeier, E. (2005): Verbesserte Hartfeinbearbeitung von Zahnrädernwt Werkstattstechnik online, 95 (2005) 6, S. 447-452, 2005 | File |
  • Kästner, M.; Meeß, K.; Seewig, J.; Reithmeier, E. (2005): Geometrieprüfung von Zahnrädern - Vergleich der Streifenprojektionstechnik mit taktilen MethodenQE-Quality, Engineering, 9/2005, 18-19 | File |
  • Kraft, A. ; Ehret, G.; Reithmeier, E. (2005): A new Micro Device for Non-Invasive Determination of Local Blood Oxygen Saturation Based on Tissue RemissionBiomedizinische Technik, 50, 1.2, pp. 54-55, Nürnberg | File |
  • Meeß, K.; Kästner, M.; Seewig, J.; Reithmeier, E. (2005): Abschätzung der Messunsicherheit bei der Geometrieprüfung von Zahnrädern mit StreifenprojektionssystemenTM - Technisches Messen, September 2005 | File |
  • Haase, R.; Seewig, J.; Reithmeier, E. (2004): Ausschuss erkennen - Zahnräder prüfbar entwerfen und fertigenQZ - Qualität und Zuverlässigkeit, 49 (2004) 9, S. 58 - 61, 2004 | File |
  • Bach, F.-W.; Denkena, B.; Doege, E.; Reithmeier, E.; Henze, A.; Friemuth, T.; Reimche, W.; Becker, J.C.; Bernard, M.; Dähndel, H.; Meeß, K.; Scheer, C.; van Well, M. (2003): Integrierte Prozessketten, eine Notwendigkeit zum PräzisionsschmiedenUTF Science (www.utfscience.de), III/2003, S. 1-8 | File |
  • Ehret, G.; Thiemann, I.; Reithmeier, E. (2003): Employing Microtechnology for Noninvasive Determination of Local Blood Oxygen Saturation Based on Tissue Remission SpectraSPIE Vol. 5141, Diagnostic Optical Spectroskopy in Biomedicine II; Georges A. Wagnieres; Ed. , Oktober 2003, S. 202 - 213 | File |
  • Reithmeier, E.; Leitmann, G. (2002): Robust Vibration Control Based On Readily Determined VariablesIntl. Journal of Engineering & Automation Problems. Volume 2 (2002), S. 14 - 18 | File |
  • Rodellar, J.; Manosa, V.; Reithmeier, E.; Ehret, G. (2002): Active Control of a Class of Structures with Uncertain CouplingsJournal of Sound and Vibration, 2002
  • Reithmeier, E.; Leitmann, G. (2001): Structural Vibration ControlJournal of the Franklin Institute 338 (2001), S. 203-223 | File |

sonstige Veröffentlichungen

  • Siemens, S.; Kästner, M.; Reithmeier, E. (2023): Micro-Topo-DatasetResearch Data Repository
    DOI: 10.25835/pngok8op
  • Bossemeyer, H.; Ahlborn, P.; Kästner, M.; Reithmeier, E. (2022): Large Range Laser Triangulation by Means of a Positionable Laser LineProceedings: The 2nd Sino-German Workshop on Intelligent Sensing and Metrology, 26-27 July 2022, Hannover, Shenzhen; TEWISS Verlag
    ISBN: 978-3-95900-774-0
  • Hagen, P.-F.; Kästner, M.; Reithmeier, E. (2022): Multimodal Measurement Approach for the Inline Characterization of Extrudate Swell Using the Example of Rubber ExtrusionThe 2nd Sino-German Workshop on Intelligent Sensing and Metrology; 26-27 July 2022, Hannover, Shenzhen; TEWISS Verlag
    ISBN: 978-3-95900-774-0
  • Hinz, L; Kästner, M.; Reithmeier, E. (2022): Influence of Vibrations on Reconstruction Accuracy in Fiber-Optic Fringe Projection ProfilometryProceedings: The 2nd Sino-German Workshop on Intelligent Sensing and Metrology; 26-27 July 2022, Hannover, Shenzhen; TEWISS Verlag
    ISBN: 978-3-95900-774-0
  • Sliti, T.; Kästner, M.; Reithmeier, E. (2022): Multi Sensor System for Turbine Blade InspectionProceedings: The 2nd Sino-German Workshop on Intelligent Sensing and Metrology, 26-27 July 2022, Hannover, Shenzhen; TEWISS Verlag
    ISBN: 978-3-95900-774-0
  • Hinz, L.; Kästner, M.; Reithmeier, E. (2021): A New Method for Multi-Scale Fringe-Projection 3D Scanner Evaluation and for Modeling Surface Normal Dependent Influencing Factors of Local Phase Measurement UncertaintyProceedings: The 1st Sino-German Workshop on Intelligent Sensing and Metrology; 26-27 July 2021, Hannover, Qingdao; TEWISS Verlag
    ISBN: 978-3-95900-672-9
  • Middendorf, P.; Kästner, M.; Reithmeier, E. (2021): GPU-Based Raytracing Simulation for the Identification of Low-Reflection Measurement PosesProceedings: The 1st Sino-German Workshop on Intelligent Sensing and Metrology, 26-27 July 2021, Hannover, Qingdao, TEWISS Verlag
    ISBN: 978-3-95900-672-9
  • Siemens, S.; Kästner, M.; Reithmeier, E. (2021): Measurement Data Registration: Comparison of Classical and ML MethodsProceedings: The 1st Sino-German Workshop on Intelligent Sensing and Metrology, TEWISS Verlag
    ISBN: 9783959006729
  • Hinz, L.; Schulte, R.; Kästner, M.; Reithmeier, E. (2020): Werkzeuginspektion in der Blechmassivumformung durch die faseroptische StreifenprojektionsmesstechnikAktuelle Entwicklungen im Bereich der Umformtechnik 23. Umformtechnisches Kolloquium Hannover
    ISBN: 978-3-95900-423-7
  • Hinz, Lennart; Schulte, Robert; Pilz, Florian; Kästner, Markus; Reithmeier, Eduard (2020): Quantifizierung der Werkzeugkondition bei der Blechmassivumformung durch faseroptische StreifenprojektionFAU University Press, Erlangen | File |
    DOI: 10.25593/978-3-96147-280-2
    ISBN: 978-3-96147-280-2
  • Beermann, R.; Müller, T.; Reithmeier, E. (2018): Optisches MesssystemPatentnummer: DE 10 2017 101 446 A1, Anmeldetag: 25.01.2017, Offenlegungstag: 26.07.2018, Veröffentlichungstag der Patenterteilung: noch nicht erteilt
  • Altmann, B.; Pape, Ch.; Reithmeier, E. (2017): Der optomechanische Bildderotator - optisch drehend MessenUnimagazin Leibniz Universität Hannover 03/04 2017
  • Beermann, R.; Quentin, L.; Kästner, M.; Pösch, A.; Reithmeier, E. (2017): Brechungsindexbestimmung zur Umsetzung hochgenauer 3D-Messungen an warmen Tailored Forming-BauteilenInnovationspotenziale in der Umformtechnik, 22. Umformtechnisches Kolloquium Hannover, 15.-16. März 2017, PZH Verlag, Garbsen, Posterbeitrag
  • Quentin, L.; Beermann R.; Pösch, A.; Kästner, M.; Reithmeier E. (2017): 3d Geometry Measurement of Hot Specimens in Rough VacuumIn: Proceedings of the 118th Annual Meeting of DGaO, DGaO 06. - 10. Juni 2017, Dresden, Deutschland, P21, ISSN: 1614-8436, https://www.dgao-proceedings.de/download/118/118_p21.pdf, Posterbeitrag
  • Schindlbeck C.; Pape, Ch.; Reithmeier, E. (2017): Makro trifft Mikro - Roboter für die Präzisionsfertigungti Technologie-Informationen 1/2017 | File |
  • Schindlbeck C.; Pape, Ch.; Reithmeier, E. (2016): Groß und dennoch hochpräzise: Die Fertigung mikrooptischer Komponenten mittels Makro-Mikro-ManipulationUnimagazin Leibniz Universität Hannover 03/04 2016 | File |
  • Scheuer, R., Reithmeier, E. (2013): Three Dimensional Surface Reconstruction Using Scanning Electron MicroscopyScientific Reports 2011-2013 Institute of Measurement and Automatic Control
  • Scheuer, R., Reithmeier, E. (2013): Quantification of the Degradation of Microstructured Coatings. Clean Sky Project "Microcoat"Scientific Reports 2011-2013 Institute of Measurement and Automatic Control

Dissertationen

  • Luo H., Reithmeier E. (2022): Dense 3D Multi-View Reconstruction of Free-Form Objects Using a UAV-Borne Triple Camera System with Active IlluminationTEWISS Verlag
    ISBN: 978-3-95900-679-8
  • Töberg S., Reithmeier E. (2022): 3D Reconstruction and Shape Characterization Based on Scanning Electron Microscope ImagesTEWISS Verlag
    ISBN: 978-3-95900-664-4
  • Beermann R., Reithmeier E. (2021): Structured Light Sensor with Affine Stereo Camera Pair for Geometry Measurements of High-Temperature Components in Rough VacuumTEWISS Verlag
    ISBN: 978-3-95900-530-2
  • Hövelmeyer A., Reithmeier E. (2021): Schadensdetektion und Charakterisierung von kaltgasgespritzten FunktionsschichtenTEWISS Verlag
    ISBN: 978-3-95900-617-0
  • Quentin L., Reithmeier E. (2021): Schätzung, Bewertung und Kompensation des Lichtablenkungseffekts bei der optischen Geometriemessung schmiedewarmer BauteileTEWISS Verlag
    ISBN: 978-3-95900-586-9
  • Altmann, B.; Reithmeier, E. (2020): Image-Based Controlled Derotator for Kinematic and Thermographic Analysis Applied to Bearings
  • Gorschenew, W., Reithmeier, E., Ortmaier, T. (2020): Optische Multisensor-Messeinrichtung zur holistischen 3-D Erfassung der Rotorblattgeometrie von Windenergieanlagen
  • Höber, S.; Reithmeier, E. (2020): Adaptive Control for Active Noise Reduction at Moving Locations
  • Strohmeier, M.; Reithmeier, E. (2020): Optische Inline-Defekterkennung an metallischen Freiformflächen in der BlechumformungTEWISS Verlag
    ISBN: 978-3-95900-472-5
  • Dietz, A. L.; Reithmeier, E. (2019): Hand Gesture and Pose Recognition using Deep Learning for Hygiene MonitoringTEWISS Verlag
    ISBN: 978-3-95900-381-0
  • Rezem, M.; Reithmeier, E. (2019): Replication of planar polymer micro-optical waveguides and componentsTEWISS Verlag
    ISBN: 978-3-95900-319-3
  • Kelb, C.; Reithmeier, E. (2018): Simulation, Herstellung und Evaluation folienintegrierbarer optischer DehnungssensorenTEWISS Verlag
    ISBN: 978-3-95900-207-3
  • Matthias, S.; Reithmeier, E. (2018): A flexible endoscopic structured light 3-D sensor: Design, models and image processingTEWISS-Verlag
    ISBN: 978-3-95900-200-4

Bücher

  • Behrens. B., Nitschke. T., Li. Y., Reithmeier,E. (2013): Einsatzpotential einer örtlich aufgelöst messenden Umformkraftsensorik und Qualifizierung zu einem ProzessüberwachungssystemEFB-Forschungsbericht Nr. 388
    ISBN: 978-3-86776-431-5
  • Janz, A., Pape, C., Reithmeier, E. (2013): 6D-Measurement System for the Position Determination of a Robot End-EffectorFringe 2013 - 7th International Workshop on Advanced Optical Imaging and Metrology, pp. 531-534, DOI: 10.1007/978-3-642-36359-7_95
  • Krauß, M., Kästner, M., Reithmeier, E (2013): Evaluation of Worn Surfaces Using Directional IlluminationOptical Measurement Techniques for Systems & Structures², ISBN 978-90-423-0419-2 S. 195-203
  • Ohrt C., Kästner M., Reithmeier E. (2013): A device for endoscopic measurements of forming tools with filigree side elementsOptical Measurement Techniques for Systems & Structures², ISBN 978-90-423-0419-2 S. 273-280
  • Ohrt, C.; Matthias S.; Kästner, M.; Reithmeier, E (2013): A DEVICE FOR ENDOSCOPIC MEASUREMENTS OF FORMING TOOLS WITH FILIGREE SIDE ELEMENTSRecent Advances in Topography, ResearchNova Science Publishers, S. 255 - 276, ISBN: 978-1-62618-840-2
  • Ohrt, C.; Matthias, S.; Kästner, M.; Reithmeier, E (2013): A DEVICE FOR ENDOSCOPIC MEASUREMENTS OF FORMING TOOLS WITH FILIGREE SIDE ELEMENTSRecent Advances in Topography Research
    ISBN: 978-1-62618-840-2
  • Hoheisel, D., Schultheis, T., Spani Molella, L., Reithmeier, E., Rissing, L. (2011): Einsatz elektromagnetischer Antriebe in fluidischen SystemenKolloquium Mikroproduktion und Abschlusskolloquium SFB 499. KIT Scientific Reports 7591, 2011, ISBN 978-3-86644-747-9
  • Behrens, B.-A.; Krimm, R.; Reithmeier, E.; Pahlke, A. (2010): Flächenintegrierende Kraftmessung an StufenpressenEFB-Forschungsbericht Nr. 309, ISBN 978-3-86776-345-5
  • Reithmeier, E.; Vynnyk, T. (2007): An Improved Method to Detect Riblets on Surfaces in Nanometer Scaling Using SEMFrom Nano to Space - Applied Mathematics Inspired by Roland Bulirsch,Teil 1. Springer Berlin Heidelberg, pp. 43-54 | File |
  • Reithmeier, E.; Leitmann,G. (2002): Vibration Control of Dynamical Systems Based on Readily Determined VariablesFestschrift zum 90. Geburtstag von Prof. Dr. rer. nat. Dr.-Ing. E.h. K. Magnus. Garching, September 2002, S. 299 - 307
  • Reithmeier, E.; Leitmann, G. (1999): Robust Control of Seismic Structures Employing Active Suspension Elements. Advances in Structural Control.: A Series of Handbooks on Theory and Engineering Applications of Computational Methods Ed.: Jose Rodellar et. al., CIMNE, Barcelona (1999), S.87-102 | File |
  • Reithmeier, E.; Leitmann, G. (1999): Pole Placement via Lyapunov for Constrained Control of Mismatched Systems. Dynamics and Control.: A Series of Handbooks on Stability and Control Ed.: G. Leitmann, F. E. Udwadia, A. V. Kryazhimskii. Gordon and Breach Science Publishers, Amsterdam (1999), S.9–16 | File |